Skip to content
Enjoy fast and free shipping on all orders over $89! Contact us (855) 424-4376
Enjoy fast and free shipping on all orders over $89! Contact us (855) 424-4376

Spec Sheet

The Carlsbad Well Light is fitted for any MR16 lamp and comes to life with the Brilliance Chameleon MR16. The flat glass top comes in a brass finish.


  • Use: Well Lighting & Underground Up Lighting
  • Finish: Copper
  • Includes:
    • LightingShrink Professional Crimp
    • Heat Shrink Cable Connector
  • No Lamp Fixture
  • Accepts MR16 and MR16 Chameleon Lamps

  1. Remove the rear cap and pull out the spring.

  2. Set the MR16 lamp on top of the spring and plug it into the socket.

  3. Insert this assembly into the fixture body with the front of the lamp toward the lens.

  4. Screw the back cap onto the fixture body and hand tighten.


  1. Dig a hole in the ground approximately 8” wide by 10” deep.

  2. Connect the power cable to the fixture, leaving 2 feet of wire coiled in the bottom of the fixture for future service.

  3. Pour 5” of pea gravel in the hole.

  4. Place the fixture in the center of the hole.

  5. Add more pea gravel to fill the hole 1” before the fixture lip. This allows for proper drainage around the fixture.

  6. Apply glass wax on top of the lens to protect against standing water.

Blog posts

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare