Skip to content
Enjoy fast and free shipping on all orders over $89! Contact us (855) 424-4376
Enjoy fast and free shipping on all orders over $89! Contact us (855) 424-4376

Language

Designed to retrofit a 1/2? sprinkler riser, DIG’s TOP 12-outlet drip manifold utilizes extremely accurate, pressure compensating individual and interchangeable drip emitters to ensure equal flow from each outlet over a wide range of operating pressures from 10 to 80 PSI. Available with .6, 1, 2 and 3.3 GPH per outlet, the TOP can deliver water directly to up to 12 plants with less water evaporation and wind-drift than the overhead sprinkler heads it replaces. Using the TOP can save a significant amount of water by improving irrigation efficiency and lowering water runoff. For additional savings, check with your city for drip irrigation rebate program eligibility.

Features

  • Constructed with 12 built-in individually pressure compensating drip emitters
  • Self-flushing emitters allow passage of water and minimize clogging
  • Interchangeable drip emitters for variable flow rates in a single head
  • Color-coded drip emitters and barbs easily identify flow rate at each zone
  • Each drip emitter individually filtered (approx. 80 mesh)
  • Backup mini disk filter
  • Rugged materials to withstand the most adverse conditions
  • Install above grade or place below grade in a 6” emitter box
  • Inlet plugs provide the option to cap off up to eight drip emitters

Specifications

  • Flow rates: .6, 1, 2.2 and 3.3 GPH (2.2, 4, 8.3 and 12.5 L/H)
  • Pressure compensating range: 8-80 PSI (.5 - 5.6 BAR)
  • Recommended operating pressure: 15-50 PSI (1 - 3 BAR)
  • Temperature range: up to 122°F (50°C)
  • Inlet size: 1/2” FNPT
  • Use with 1/8” (.187" OD) or 1/4” (.150" - .160" ID) distribution tubing
  • Materials:
  • Body and cover: high-impact plastic
  • Filter: nylon
  • Diaphragm: silicon
  • Filter requirement: minimum of 120 mesh/ 130 micron,depending on water quality and concentration of dirt particles


Flow rates: .6, 1, 2.2 and 3.3 GPH (2.2, 4, 8.3 and 12.5 L/H)
Pressure compensating range: 8-80 PSI (.5 - 5.6 BAR)
Recommended operating pressure: 15-50 PSI (1 - 3 BAR)
Temperature range: up to 122°F (50°C)
Inlet size: 1/2” FNPT
Use with 1/8” (.187" OD) or 1/4” (.150" - .160" ID) distribution tubing
Materials:
Body and cover: high-impact plastic
Filter: nylon
Diaphragm: silicon
Filter requirement: minimum of 120 mesh/ 130 micron,depending on water quality and concentration of dirt particles

Blog posts

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare