DIG

The 1/4” barbed fittings are used in the installation and connections of all brands of 1/4” poly drip tubing and 1/4 drip line (.140 ID to .170 ID)...

The 1/4” barbed fittings are used in the installation and connections of all brands of 1/4” poly drip tubing and 1/4 drip line (.140 ID to .170 ID)...

Constructed of molded ultraviolet-resistant, high-impact plastic, DIG’s Compression Fittings are able to fit a range of polyethylene drip tubing an...

Features High-impact plastic UV-resistant Stake with flow adjustment available with 10/32 thread Flow rate on stake is adjustable to off For secur...

DIG’s 1/4 blank polyethylene distribution tubing is available in several colors and in lengths of up to 3000’. The distribution tubing is manufactu...

DIG premium polyethylene drip tubing is designed to meet all installation requirements for drip irrigation or low-volume irrigation systems for com...

DIG premium polyethylene drip tubing is designed to meet all installation requirements for drip irrigation or low-volume irrigation systems for com...

Contains antioxidants to protect the drip tubing from thermal degradation; minimum of 2% concentrated carbon black resin added Polyethylene drip tu...

Features Available in four configurations Large red color indicator for visibility Unique design insures reliable operation Can be installed with ...

DIG Pressure Compensating (PC) Button Drip Emitters are designed to produce a consistent flow rate over a pressure range of 7.25 to 58 PSI. DIG PC ...

Port Cap for unused emitter ports on the Maverick 12-Outlet Drip Manifold. A strip of 8 caps is considered a qty of 1.

DIG’s 360° adjustable drip emitters are available with a barb or spike and have a flow dial enabling the flow to be adjustable between 0 to 14.1 GP...

The Button Drip Emitters utilize a unique labyrinth flow path design, producing a turbulent flow for consistent operation with less chance of clogg...

DIG’s Micro Sprayers are available in 90°, 180° and 360° spray patterns with a flow rate of up to14.7 gallons per hour at 30 PSI. Producing a fine ...

The A-Jet adjustable micro sprayers incorporate an adjustable micro valve that allows control of flow and diameter to reduce or increase the wettin...

DIG’s EXL Series Low-Flow 10-32 thread and 1/4? barbed Foggers operate at a pressure range of 30 to 80 PSI to produce micro-sized droplets, support...

DIG’s one-piece barbed fittings are constructed of corrosion-resistant, UV-protected poly acetal and can withstand the harsh environment, direct su...

The 1/4” barbed fittings are used in the installation and connections of all brands of 1/4” poly drip tubing and 1/4 drip line (.140 ID to .170 ID)...

DIG’s line of threaded fittings consists of hose and pipe thread adapters and caps with male or female threads. Features Hose or pipe thread with ...

Constructed of molded ultraviolet-resistant, high-impact plastic, DIG’s Compression Fittings are able to fit a range of polyethylene drip tubing an...

DIG 1/4” Microline™ Dripline is a versatile and flexible, UV-protected small-diameter dripline that is suitable for a wide range of irrigation appl...

Spec Sheet  Install Manual DIG LEIT Solar Powered controller  ILV-200 with 2" Inline Valve Ambient Light Powered Irrigation Controller Powered so...

DIG Irrigation LEIT-1  Solar Powered Irrigation Controller ONLY Spec Sheet  Install Manual DIG’s LEIT 1™ single-station solar powered controller wi...

Spec Sheet  Install Manual DIG LEIT Solar Powered controller  LEIT1 ASV-075 with 3/4 Anti-Siphon Valve Ambient Light Powered Irrigation Controlle...