Rinnai V94iP Residential High Efficiency 9.8 GPM Indoor, Propane Tankless Water Heater, While supplies last (Replaced by RE199)

Current RL and 4 of the V models will be discontinued and replaced with the New RE•SERIES™ Non-Condensing models including the REP models with a Built-In Pump and Smart-Circ™ Intelligent Recirculation™

The High Efficiency (HE) Series V Models are the perfect combination of comfort and value. These easy-to-install, compact models combine all the reliability you’d expect from Rinnai with performance that’s ideal for medium- to smaller sized new homes or remodels.

Features

• Temperature controlled, continuous flow, gas hot water system
• Energy Factor of .81 for both Natural Gas and Propane
• Certified for Installation in Manufactured (Mobile) Homes
• Forced combustion
• For Indoor Use Only
• Complies with South Coast Air Quality Management District 14 ng/J or 20 ppm NOx emission levels
• AHRI, CSA, CEC Certified

Specifications

• Minimum/Maximum Gas Rate (Input): 10,300 - 199,000 BTU/h
• Operation: Forced combustion
• Electrical:
• Appliance: AC 120 Volts - 60 Hz
• Controller: DC 12 Volts
• Electrical Consumption:
• Normal: 97W
• Standyby: 2W
• Anti-Frost Protection: 120W
• Amperage: 4A
• Ignition System: Direct Electronic Ignition
• Hot Water Capacity:
• Minimum flow rate: 0.26 GPM
• Minimum activation flow rate: 0.4 GPM
• Maximum flow rate: 9.8 GPM
• Temperature: 98° - 120° F
• Temperature (without remote): 120° F (49° C) (factory default) or 140° F (60° C)
  
• Uniform Energy Factor (UEF): 0.81
• Service Connections:
• Gas supply: 3/4 inch MNPT
• Cold water inlet: 3/4 inch MNPT
• Hot water outlet: 3/4 inch MNPT
• Water Flow Control: Water flow sensor, electronic water control device and fixed by - pass.
• Minimum/Maximum Water Supply Pressure: 20 - 150 PSI
• Min. / Max. Gas Supply Pressure:
• Min 8” W.C. (10mbar) max 13.5” W.C. (26.1mbar)
• Manifold Gas Pressure:
• High Fire: 4.7" W.C.
• Low Fire: 0.87" W.C.

Safety Devices:

• Flame failure - Flame Rod
• Boiling protection
• Combustion fan rpm check
• Over current - glass fuse
• Remaining flame (OHS)
• Thermal fuse
• Automatic frost protection

• Rinnai is continually updating and improving products; therefore, specifications are subject to change without prior notice. Local, state, provincial and federal codes must be adhered to prior to installation.