Rain Bird - Pressure Compensating Emitter

The only emitters with self-piercing barbs, making them the easiest to install using the Xeriman tool.

Widest selection of pressure-compensating emitters, with 6 flow rates and 2 inlet options.

• Most compact and unobtrusive emitters.
• Flow rates from 5 to 24 gph (18.93 to 90.84 l/h).
• Pressure-compensating design delivers uniform flow throughout a wide pressure range (10 to 50 psi; 0.7 to 3.5 bar).
• Available with 2 different inlets:
• Self-piercing barbs for quick one-step emitter insertion into 1/2" or 3/4" drip tubing.
• 10-32 threaded inlet that easily threads into a PolyFlex Riser, 10-32 Thread adapter or 1800 Xeri-Bubbler Adapter.
• Inlet and outlet barbs securely retain 1/4" Distribution Tubing (XQ).
• Robust design; durable plastic construction is UV-resistant and color-coded to identify flow rate.

• Flow: 5 to 24 gph (18.93 to 90.84 l/h)
• Pressure: 10 to 50 psi (0.7 to 3.5 bar)
• Required filtration: 100-mesh (150-micron)

Specifications:

• Inlet Thread: Barb x Barb
• Flow Control: 5

Model PC05
Emission Device Type Single-outlet Emitter
Inlet Type Barb
Flow Rate 5.0 gph
Operating Range
Pressure: 10 to 50 psi (0.7 to 3.5 bar)
Required filtration: 100-mesh (150-micron)
*Note: Must use a PC Diffuser Cap (X50001 or X50002-reclaimed) attached to the top of the PC Module to avoid squirting water when using a PC Module as the final point of emission in an installation (for example; when connected directly to tubing, at the end of ¼” Distribution Tubing or on a PolyFlex Riser (PFR/FRA)).