Skip to content
Enjoy fast and free shipping on all orders over $89! Contact us (855) 424-4376
Enjoy fast and free shipping on all orders over $89! Contact us (855) 424-4376

Language

  • Oil-filled, hermetically-sealed motor with automatic reset thermal overload protection
  • Rugged, cast iron motor housing with corrosion-resistant, baked-on enamel finish
  • Efficient heat sink for heat dissipation
  • Glass-filled polypropylene base and pump housing with no screen
  • Passes 3/8” (9.5 mm) spherical solids
  • Reliable tethered float switch
  • Carbon and ceramic rotary seal
  • Watertight, neoprene seal between motor and cover
  • Stainless steel screws and hardware
  • Temperature rating: 104 °F (40 °C)
  • On point: 11-1/4” (28.6 cm)
  • Off point: 4-1/8” (10.5 cm)
  • Maximum width: 8-3/32" (21 cm)
  • Maximum height: 10-1/2" (26.7 cm)
  • Weight: 11 lbs (5 Kg)
  • Fits 12" (30 cm) diameter pits
  • 100% factory tested after assembly

Notes

Reserve Powered Design. For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

    Motor 1/4 HP
    Voltage 115 V
    Phase 1 Ph
    Hertz 60 Hz
    RPM 3450 RPM
    Type Permanent split capacitor
    Insulation Class B
    Amps 4.0 Amps
    Operation Automatic
    Auto On / Off Points 11-1/4" / 4-1/8" (28.6 cm / 10.5 cm)
    Discharge Size 1-1/2" NPT
    Solids Handling 3/8" (9.5 mm) spherical solids
    Cord Length 10' (3 m) standard
    Cord Type UL listed, 3-wire cord and plug
    Max Head 18' (5.5 m)
    Max Flow Rate 32 GPM (121 LPM)
    Max Operating Temperature 104 °F (40 °C)
    Cooling Oil filled
    Motor Protection Auto reset thermal overload
    Cap Engineered plastic
    Motor Housing Cast iron
    Pump Housing Engineered plastic
    Base Engineered plastic
    Upper Bearing Ball bearing
    Lower Bearing Ball bearing
    Mechanical Seals Carbon and ceramic
    Impeller Type Non-clogging vortex
    Impeller Engineered plastic
    Hardware Stainless steel
    Gasket NBR



    Blog posts

    Compare products

    {"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

    Select first item to compare

    Select second item to compare

    Select third item to compare

    Compare