DIG Irrigation - 12-085 - 1/8″ Poly Distribution Tubing, 3000 feet

DIG’s 1/4″ blank polyethylene distribution tubing is available in several colors and in lengths of up to 3000’. The distribution tubing is manufactured from high-quality, low-density polyethylene resin with a minimum of 2% carbon black to protect the finished product from thermal degradation, ultraviolet stress and chemicals.

Features

• Blank polyethylene distribution tubing is available in 50′, 100′, 500′, 1000′ and 3000′ coils (15 m, 30 m, 150 m, 300 m, 900 m)
• Used with drip emitters, micro sprayers or micro sprinklers in above- or below-grade installation
• 500′, 1000′ and 3000′ coils (150 m, 300 m, 900 m) are wound on cardboard cores
• Extruded from the finest quality low density polyethylene resins
• UV resistant; contains a minimum of 2% concentrated carbon black, an antioxidant that protect the tubing from thermal degradation
• Supported by quality control standard and processes to ensure consistent coil productions
• Exhibits outstanding environmental stress-cracking resistance and burst strength

Specifications

• Operating pressure: up to 60 PSI (4.2 BAR)
• Material: Dow FINGERPRINT™ DFDA-7510 NT linear low-density polyethylene resin with a minimum of 2% carbon black
• Available in three configurations:
  • .125" ID x .187" OD (3.2 x 4.7 mm)
  • .170" ID x .250" OD (4.3 x 6.3 mm)

Operating pressure: up to 60 PSI (4.2 BAR)
Material: Dow FINGERPRINT™ DFDA-7510 NT linear low-density polyethylene resin with a minimum of 2% carbon black
Available in three configurations:
.125" ID x .187" OD (3.2 x 4.7 mm)
.170" ID x .250" OD (4.3 x 6.3 mm)