Installation
- Allows for extended sump pump run time
- Easy to install and is wired in parallel (positive-to-positive and negative-to-negative)
- Connects multiple batteries
To increase the run time of your system, two batteries can be connected together.
- Unplug the system from the wall
- Place one battery next to the controller. This will be considered "Battery A"
- The black wire with the positive (plus) sticker should be placed on the positive (plus) terminal of both batteries
- Tighten the wing nut on to the positive (plus) side of Battery B.
- Now attach the positive (plus) wire from the controller to the positive (plus) post of Battery A, and tighten the wing nut securing both wires.
- The white wire should be placed on the negative (-) terminal of both batteries
- Tighten the wing nut on the negative (-) side Battery B
- Now attach the negative (-) wire from the controller to the negative (-) post of Battery A, and tighten the wing nut securing both wires
- Insert the fluid sensor into Battery A's insertion point
- You will need to manually monitor the water level in the secondary battery
- We suggest checking it at least every 4-6 months
- Plug the control unit back into a grounded AC wall outlet
- The system will monitor and charge both batteries
- No external charger is needed for the secondary battery