Irrigation Valves

Irrigation valves control drip and sprinkler zones with dependable, serviceable designs. Shop inline/globe valves for manifolds, anti-siphon valves with built-in backflow protection, and complete drip zone kits with filter and pressure regulation—plus solenoids and repair parts to keep systems running.

Shop by need

Inline / globe valves: 3/4" and 1" bodies for valve boxes and manifolds; flow-control options
Anti-siphon valves: valve + atmospheric vacuum breaker for code-friendly backflow protection (mount above outlets)
Drip zone kits: valve + filter + 25–30 PSI regulator assemblies for low-flow drip systems
Solenoids: 24VAC coils for wired controllers and 9V DC latching for battery timers
Repair parts: diaphragms/bonnets, O-rings, filter screens, flow-control stems, replacement solenoids

Quick choosing guide

Pick the valve type: use inline valves with a separate backflow device; choose anti-siphon where allowed and where the valve can sit above the highest downstream outlet.
Match your controller: 24VAC valves for standard wired controllers; 9V latching valves/solenoids for battery controllers. These are not interchangeable.
Size & threads: 3/4" fits most residential zones; 1" for higher flow. Confirm FIP/MIP/slip ends to match your plumbing.
Low-flow drip: choose a drip zone kit or a valve rated for low-flow operation to prevent chatter; always add filtration and regulation.
Flow control helps: a flow-control stem lets you throttle a zone for tuning and isolate it for service.
Plan wiring & protection: use gel-filled, direct-burial connectors and place valves in accessible boxes above standing water.

Pro tips: Flush lines before install, follow the flow arrow, and don’t overtighten fittings. Test with the manual bleed screw, then check for leaks under pressure. Keep anti-siphon valves above the highest outlet and out of splash zones. For sticky zones, replace the diaphragm and clean the screen. Questions? Tell us controller type, zone flow, and pipe size—we’ll recommend a dialed-in valve or drip kit.

Irrigation Valves

Shop by need

Quick choosing guide

Rain Bird - Válvula DV100F DVF de 1" con control de flujo

Toro EZF-20-04 Válvula deslizante de 1 pulgada con control de flujo

Rain Bird - RBY075MPTX Filtro RBY en línea de 3/4" con pantalla de malla 200

Rain Bird - RBY100MPTX Filtro RBY en línea de 1" con pantalla de malla 200

Rain Bird - Válvula de riego industrial de plástico en línea con entrada PEB

Rain Bird - Regulador de presión en línea de flujo medio - 3/4" 30 PSI

Rain Bird - 200PESBR Válvula de riego industrial de plástico en línea con entrada de 2" (para agua recuperada)

Rain Bird - XCZ100PRF Kit de zona de control de flujo medio con válvula DV de 1" con filtro PR de 1" (ensamblado)

Rain Bird - 100PESBR Válvula de riego industrial de plástico en línea con entrada de 1" (agua recuperada)

Rain Bird - DV75 Válvula de riego residencial de plástico en línea serie DV de 3/4"

Rain Bird - DV100SS Válvula de riego residencial de plástico en línea serie DV de 1" Slip X Slip

Rain Bird - 100DVFSS - DVF Inline Valve with Flow Control 1 in. Slip

Rain Bird 100-DVF Válvula de aspersor residencial de entrada de 1" con control de flujo-2PK

Rain Bird XCZ-100-PRBR: válvula PESBR de 1" y filtro de cesta regulador de presión (40 psi) de 1"

Rain Bird XCZ-100-PRB-COM: Válvula de bola de 1" con válvula PESB de 1" y regulador de presión de 1" (40 psi), filtro de cesta de verificación rápida

Rain Bird XCZ-100-FLOW: Válvula de bola de 1" con válvula PESB de 1" y regulador de presión de 1"

DIG Irrigation 33-001 Válvula en línea de 3/4" con solenoide de 24 VCA, sin control de flujo

Añadido a su carrito:

Comparar productos

Irrigation Valves

Shop by need

Quick choosing guide

Idioma

Comparar productos