Vu-Flow NT200-250P-NT2SC250 2 in. 250 Mesh Sediment Filter with Spare Screen
Brand: Vu-Flow | Supplier: American Granby | Bundle SKU: NT200-250P-NT2SC250
Product Overview
The Vu-Flow NT200-250P bundle pairs one complete 2 in. NT-series sediment filter with one additional NT120SC250 replacement screen. Both the installed element and the spare use 250-mesh polyester media, with an approximate 61-micron opening, so routine screen replacement keeps the same filtration rating.
The 250-mesh option provides an approximately 61-micron opening for finer suspended sediment. Its 2 in. body suits higher-flow piping, but a finer screen may need more frequent cleaning in heavily loaded water.
Key Features
- One NT200-250P filter plus one NT120SC250 spare element
- 250-mesh rating on both screens
- 2 in. slip connections
- Clear sump makes sediment buildup visible
- Bottom purge valve and reusable screens support routine service
What's Included
- 1 × NT200-250P complete filter with installed 250-mesh screen
- 1 × NT120SC250 additional 250-mesh standard-filter screen
Common Uses
- Water-system sediment pre-filtration where the specified mesh and flow range are suitable
- Protecting compatible irrigation valves and downstream equipment from suspended particles
- Keeping a matching spare screen available for filter service
Technical Specifications
- Filter model: NT200-250P
- Spare screen: NT120SC250
- Bundle quantity: One complete filter plus one additional screen
- Inlet/outlet: 2 in. slip
- Installed and spare screen rating: 250 mesh
- Approximate opening: 61 microns
- Screen media: Polyester
- Style: NT T-style standard screen filter
- Catalog flow range: 18–100 GPM; lower limit is the minimum for spin-out action
- Maximum pressure: 150 PSI at 73°F
- Maximum temperature: 100°F at 40 PSI
- Cleanout: 1/2 in. with purge valve
- Service: Water only
Dimensions
- Complete filter: 17-7/8 in. L × 5-1/2 in. W
Compatibility & Installation Notes
- Use NT120SC250 for like-for-like replacement of the standard screen. Match the filter family and body size as well as mesh.
- Install after the pump pressure switch; do not install a filter with a purge valve on the suction side of a pump.
- Observe flow direction and leave clearance below the sump for removal. Isolate and depressurize before opening the housing.
- Sediment screening does not remove dissolved contaminants or disinfect water.
- Supplier photographs show the NT filter and replacement-screen families. This bundle supplies one filter and one additional screen; the photographs are not a picture of the packed kit.
Frequently Asked Questions
What is included?
One complete NT200-250P filter with its installed 250-mesh screen, plus one additional NT120SC250 250-mesh replacement screen. There are two screen elements in total.
What pipe connections does the filter use?
The NT200-250P has 2 in. slip inlet and outlet connections.
What does the mesh rating mean?
The 250-mesh screen has an approximate 61-micron opening. Choose it for the suspended sediment you need to screen and the requirements of downstream equipment.
Can the screens be cleaned and reused?
Yes. Use the purge valve for routine flushing. When further cleaning is needed, isolate and depressurize the system before removing the sump and element.
Why Buy from Big Frog Supply?
The NT200-250P pairs 2 in. slip connections with finer 250-mesh screening for compatible higher-flow water systems. The NT120SC250 spare matches the standard-filter design and approximately 61-micron opening, so replacement preserves the selected screen rating.
Filter model: NT200-250P
Spare screen: NT120SC250
Bundle quantity: One complete filter plus one additional screen
Inlet/outlet: 2 in. slip
Installed and spare screen rating: 250 mesh
Approximate opening: 61 microns
Screen media: Polyester
Style: NT T-style standard screen filter
Catalog flow range: 18–100 GPM; lower limit is the minimum for spin-out action
Maximum pressure: 150 PSI at 73°F
Maximum temperature: 100°F at 40 PSI
Cleanout: 1/2 in. with purge valve
Service: Water only
