EmeryAllen E12 2.5W Dim-to-Warm LED Bulb, 1800K–2700K

EmeryAllen E12 2.5W Dim-to-Warm LED Bulb, 1800K–2700K

Brand: EmeryAllen | SKU: EA-E12-2.5W-DTW-2718-D

Product Overview

The EmeryAllen EA-E12-2.5W-DTW-2718-D is an E12 LED retrofit for compatible 120V AC fixtures. It provides 200 lumens in a 1-7/8-inch-long lamp. With compatible dimming equipment, the light warms from approximately 2700K toward 1800K as brightness decreases. Match the socket, available clearance and desired color-changing dimming behavior before ordering.

Key Features

• 200-lumen published output in 1800K–2700K dim-to-warm light.
• E12 candelabra screw base with 120V AC input.
• 2.5W LED power consumption.
• 90+ CRI for color rendering.
• Broad 360° light distribution.
• Ceramic and polycarbonate construction.

Common Uses

Compatible decorative E12 fixtures where warmer light at lower brightness suits the room. Check the fixture’s permitted output, clearance and LED-compatible controls.

Technical Specifications

Dimensions

Overall lamp length: 1-7/8 inches. Maximum lamp diameter: 5/8 inches. These are lamp dimensions; the base designation and wattage do not describe the lamp’s overall size.

Compatibility & Installation Notes

Match the exact E12 socket, 120V AC supply and lamp clearance. Turn power off and allow the old lamp to cool before replacement. Compare lumens with the fixture’s recommended original lamp; do not select a brighter LED solely because its electrical wattage is lower. Use an LED-compatible dimmer and check its load range and fixture controls. Do not assume every ceiling-fan receiver, timer, photocell or hi/lo switch supports LED loads. Damp-location and enclosed-fixture suitability still require the fixture’s protection and the manufacturer’s thermal guidance. Keep the bulb protected from direct water exposure. For this wattage, the manufacturer’s technical guide lists a minimum enclosed shade size of 2.5 × 2.5 × 2.5 inches (16 cubic inches). This dim-to-warm version changes color with dimming; it does not provide independently selectable fixed color temperatures.

Frequently Asked Questions

What does dim-to-warm do?

With compatible dimming equipment, the light becomes warmer as output decreases, moving from approximately 2700K toward 1800K.

What socket and voltage does it need?

It uses an E12 connection and requires 120V AC. It must not be fitted to a 12V system.

How large is the lamp?

The overall length is 1-7/8 inches and maximum diameter is 5/8 inches. Check both against the fixture clearance.

Does it stay at one color while dimming?

No. This lamp changes color with dimming. Choose a fixed-color model when you want a constant color temperature at lower brightness.

Why Buy from Big Frog Supply?

Choose the E12 2.5W dim-to-warm lamp when a compact candelabra fitting should become warmer as it dims. Its 200-lumen output and 1-7/8-inch overall length suit a smaller decorative role than the high-output E12 retrofits. Confirm 120V AC supply and a compatible dimmer to use the 2700K-to-1800K transition.

Manufacturer part number: EA-E12-2.5W-DTW-2718-D
Base: E12 candelabra screw base
Nominal model wattage: 2.5W
Published power consumption: 2.5W
Input voltage: 120V AC
Light output: 200 lumens
Color temperature: 1800K–2700K dim-to-warm
Color rendering index: 90+
Beam distribution: 360°
Material: Ceramic and polycarbonate
Dimming: Compatible dimmer required
Rated life: 36,000 hours under the manufacturer’s current guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
Location suitability: Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp

Overall lamp length: 1-7/8 inches. Maximum lamp diameter: 5/8 inches. These are lamp dimensions; the base designation and wattage do not describe the lamp’s overall size.