EmeryAllen G9 2.5W Dim-to-Warm LED Bulb, 1800K–2700K

EmeryAllen G9 2.5W Dim-to-Warm LED Bulb, 1800K–2700K

Brand: EmeryAllen | SKU: EA-G9-2.5W-DTW-2718-D

Product Overview

The EmeryAllen EA-G9-2.5W-DTW-2718-D is a compact G9 loop-pin LED lamp for 120V AC fixtures. With compatible dimming equipment, its light warms from approximately 2700K toward 1800K as output decreases. Its 200-lumen specification and 1-7/8-inch overall length suit small decorative fittings where both brightness and clearance matter.

Key Features

• 200-lumen published output in 1800K–2700K dim-to-warm light.
• G9 loop-pin base with 120V AC input.
• 2.5W LED power consumption.
• 90+ CRI for color rendering.
• Broad 360° light distribution.
• Ceramic and polycarbonate construction.

Common Uses

Compatible decorative, ceiling, pendant or display lighting that requires a G9 base and allows 200 lumens. Fixture suitability depends on clearance, temperature and the lamp rating; a matching base alone does not establish suitability for an appliance or specialty installation.

Technical Specifications

Dimensions

Overall lamp length: 1-7/8 inches. Maximum lamp diameter: 5/8 inches. These are lamp dimensions; the base designation and wattage do not describe the lamp’s overall size.

Compatibility & Installation Notes

Match the exact G9 socket, 120V AC supply and lamp clearance. Turn power off and allow the old lamp to cool before replacement. Compare lumens with the fixture’s recommended original lamp; do not select a brighter LED solely because its electrical wattage is lower. Use an LED-compatible dimmer and check its load range and fixture controls. Do not assume every ceiling-fan receiver, timer, photocell or hi/lo switch supports LED loads. Damp-location and enclosed-fixture suitability still require the fixture’s protection and the manufacturer’s thermal guidance. Keep the bulb protected from direct water exposure. This dim-to-warm version changes color with dimming; it does not provide independently selectable fixed color temperatures.

Frequently Asked Questions

What does dim-to-warm mean?

With a compatible dimmer, the light becomes warmer as brightness is reduced, moving from approximately 2700K toward 1800K.

Does it fit a 12V bi-pin fixture?

No. This model uses a G9 loop-pin base and requires 120V AC. It is not a 12V G4 or GY6.35 lamp.

How large is the bulb?

Its overall length is 1-7/8 inches and maximum diameter is 5/8 inch. Check both against the fixture.

Does it stay at one color temperature while dimming?

No. This model changes color with dimming. Choose a fixed-color G9 if you want that different behavior.

Why Buy from Big Frog Supply?

Choose the G9 2.5W dim-to-warm lamp for a small loop-pin fixture where the light should become warmer as it dims. The 200-lumen output and 1-7/8-inch overall length suit a different role from the brighter fixed-color G9 models. Confirm a compatible dimmer to use its 2700K-to-1800K color transition.

Manufacturer part number: EA-G9-2.5W-DTW-2718-D
Base: G9 loop-pin base
Nominal model wattage: 2.5W
Published power consumption: 2.5W
Input voltage: 120V AC
Light output: 200 lumens
Color temperature: 1800K–2700K dim-to-warm
Color rendering index: 90+
Beam distribution: 360°
Material: Ceramic and polycarbonate
Dimming: Compatible dimmer required
Rated life: 36,000 hours under the manufacturer’s current guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
Location suitability: Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp

Overall lamp length: 1-7/8 inches. Maximum lamp diameter: 5/8 inches. These are lamp dimensions; the base designation and wattage do not describe the lamp’s overall size.