EmeryAllen G9 3W Directional COB LED Bulb, 2700K, 180° Beam
Brand: EmeryAllen | SKU: EA-G9-3.0W-005-2790-D
Product Overview
The EmeryAllen EA-G9-3.0W-005-2790-D provides 300 lumens of 2700K light through a G9 loop-pin connection. Its 180° directional COB design has a 1-1/4-inch overall length and 1-3/16-inch face diameter. Check the emitting-face direction, body width and nominal 120V fixture supply before replacing an all-around G9 capsule.
Key Features
- 300 lumens at 2700K.
- G9 loop-pin base for 100–130V AC (120V nominal).
- 3W model class; 3W published consumption.
- 90+ CRI for color rendering.
- Directional 180° light pattern.
- Ceramic and polycarbonate construction.
Common Uses
Accent or display lighting in compatible nominal 120V G9 fixtures where the emitting face can point toward the intended area.
Technical Specifications
| Manufacturer part number | EA-G9-3.0W-005-2790-D |
|---|---|
| Base | G9 loop-pin base |
| Nominal model wattage | 3W |
| Published power consumption | 3W |
| Input voltage | 100–130V AC (120V nominal) |
| Light output | 300 lumens |
| Color temperature | 2700K |
| Color rendering index | 90+ |
| Beam distribution | 180° directional |
| Material | Ceramic and polycarbonate |
| Control | Compatible LED dimmer required |
| Rated life | 36,000 hours under current manufacturer guidance |
| Manufacturer warranty | Limited lifetime warranty; conditions apply |
| Location suitability | Damp locations and enclosed fixtures subject to fixture protection and thermal limits; protect from direct water exposure. |
| LED design | Directional COB (chip on board) |
Dimensions
Overall lamp length: 1-1/4 inches. Emitting-face diameter: 1-3/16 inches. Confirm space around the wide face as well as the socket position.
Compatibility & Installation Notes
Match the G9 socket and 100–130V AC (120V nominal) supply. Turn power off and let the old lamp cool before replacement. Compare lumens with the fixture’s recommended original lamp; lower LED wattage alone does not permit a brighter replacement. Use compatible LED dimming equipment and check its load range. Verify any ceiling-fan receiver, timer, photocell or hi/lo control supports the lamp and LED load. Damp-location and enclosed-fixture use still require protection from direct water and compliance with the manufacturer’s thermal guidance. The directional emitting face must point toward the intended area. A matching G9 connection alone does not establish clearance for the wider body.
Frequently Asked Questions
What connection and supply does it require?
It uses a G9 loop-pin base and requires 100–130V AC (120V nominal). Match both the socket and fixture supply.
How does its light pattern differ from a G9 capsule?
It provides 300 lumens at 2700K with a 180° directional pattern. Confirm the emitting-face orientation rather than assuming all-around light.
Can I use it with a dimmer?
Use compatible LED dimming equipment and check the control’s load range and the fixture’s requirements.
What measurements should I check?
Check the 1-1/4-inch overall length and 1-3/16-inch face diameter against the socket, shade and desired light direction.
Why Buy from Big Frog Supply?
Choose the directional G9 3W 2700K when a 180° light pattern suits the installation better than all-around capsule lighting. Its 300-lumen output and 1-3/16-inch face diameter help you compare brightness and clearance. Check the emitting-face direction and 1-1/4-inch overall length before ordering for accent or display lighting.