EmeryAllen 3.5W G9 capsule LED Filament Bulb, 3000K, Clear
Brand: EmeryAllen | SKU: EA-G9-3.5W-FIL-3090-D
Product Overview
The EmeryAllen EA-G9-3.5W-FIL-3090-D pairs a G9 capsule shape and clear finish with an G9 base. It provides 3000K light for a consistent warm appearance. The 3.5W-class lamp has a published output of 300 lumens and a 2-11/16-inch overall length. Match its size and electrical requirements to the fixture before ordering.
Key Features
- 300-lumen published output in 3000K light.
- G9 loop-pin base with 100–130V AC (120V nominal) input.
- 3.5W LED power consumption.
- 93 CRI for color rendering.
- Broad 360° light distribution.
- Clear glass exposes the LED filament design.
Common Uses
Decorative G9 fixtures where the lamp is visible, including compatible pendants, sconces or table lamps. Useful when a visible filament appearance and 3000K light are part of the design.
Technical Specifications
| Manufacturer part number |
EA-G9-3.5W-FIL-3090-D |
| Base |
G9 loop-pin base |
| Nominal model wattage |
3.5W |
| Published power consumption |
3.5W |
| Input voltage |
100–130V AC (120V nominal) |
| Light output |
300 lumens |
| Color temperature |
3000K |
| Color rendering index |
93 |
| Beam distribution |
360° |
| Material |
Glass and aluminum |
| Dimming |
Compatible dimmer required |
| Rated life |
15,000 hours |
| Manufacturer warranty |
5-year limited warranty; conditions apply |
| Glass finish |
Clear |
| Location suitability |
Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp |
Dimensions
Overall lamp length: 2-11/16 inches. Maximum lamp diameter: 11/16 inches. These are lamp dimensions; the base designation and wattage do not describe the lamp’s overall size.
Compatibility & Installation Notes
Match the exact G9 socket, 100–130V AC (120V nominal) supply and lamp clearance. Turn power off and allow the old lamp to cool before replacement. Compare lumens with the fixture’s recommended original lamp; do not select a brighter LED solely because its electrical wattage is lower. Use an LED-compatible dimmer and check its load range and fixture controls. Do not assume every ceiling-fan receiver, timer, photocell or hi/lo switch supports LED loads. Damp-location and enclosed-fixture suitability still require the fixture’s protection and the manufacturer’s thermal guidance. Keep the bulb protected from direct water exposure.
Frequently Asked Questions
What base and voltage does it use?
It uses a G9 base and 100–130V AC input for a nominal 120V fixture.
How bright is this lamp?
The published specification is 300 lumens at 3000K. Match that output to the fixture’s recommended lamp.
Can I use it on a dimmer?
Yes, with compatible LED dimming equipment. Check the dimmer’s load range and any fixture-specific controls.
How do I check the fit?
Compare the G9 connection and 2-11/16-inch overall lamp length with the socket and shade clearance. The maximum lamp diameter is 11/16 inches.
Why Buy from Big Frog Supply?
Choose the clear G9 3.5W filament lamp for a visible filament appearance with 300 lumens of 3000K light. Its 2-11/16-inch overall length is longer than the standard 3W G9 even though their lumen ratings match. Check the 11/16-inch diameter and the full shade space before choosing the decorative filament design.
Manufacturer part number: EA-G9-3.5W-FIL-3090-D
Base: G9 loop-pin base
Nominal model wattage: 3.5W
Published power consumption: 3.5W
Input voltage: 100–130V AC (120V nominal)
Light output: 300 lumens
Color temperature: 3000K
Color rendering index: 93
Beam distribution: 360°
Material: Glass and aluminum
Dimming: Compatible dimmer required
Rated life: 15,000 hours
Manufacturer warranty: 5-year limited warranty; conditions apply
Glass finish: Clear
Location suitability: Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp
