EmeryAllen 5W G9 COB LED Retrofit Lamp - 4000K
Brand: EmeryAllen | SKU: EA-G9-5.0W-COB-409F-D
Product Overview
Bring a cooler 4000K appearance to a fixture designed for a G9 loop-pin lamp. The 5W COB retrofit provides 500 lumens in a ceramic/polycarbonate body, with a 2-1/2-inch overall length. It needs a nominal 120V supply, so a similar-looking low-voltage bi-pin capsule is not an interchangeable choice.
Key Features
- 500 lumens at fixed 4000K.
- G9 loop-pin connection for 100–130V AC (120V nominal).
- 5W model class; 5.0W published consumption.
- 360° light distribution.
- COB LED design with ceramic/polycarbonate construction.
Common Uses
- Compatible line-voltage G9 vanity and wall fixtures.
- G9 pendants and decorative fittings with adequate clearance.
Technical Specifications
- Manufacturer part number: EA-G9-5.0W-COB-409F-D
- Base: G9 loop-pin
- Nominal model wattage: 5W
- Published power consumption: 5.0W
- Input voltage: 100–130V AC (120V nominal)
- Light output: 500 lumens
- Color temperature: fixed 4000K
- CRI: 90+
- Beam distribution: 360°
- Material: Ceramic and polycarbonate
- Control: Dimmable with compatible LED controls; check the dimmer load range
- Rated life: 36,000 hours under current manufacturer guidance
- Manufacturer warranty: Limited lifetime warranty; conditions apply
- Damp-location and enclosed-fixture suitability subject to thermal guidance and protection from direct water exposure
- LED design: COB (chip on board)
Dimensions
Overall lamp length: 2-1/2 inches. Maximum lamp diameter: 3/4 inches. Compare both with the socket position, shade opening and available lamp space.
Compatibility & Installation Notes
Match the G9 loop-pin socket and 100–130V AC (120V nominal) supply. Turn off power and let the old lamp cool before replacement. Compare lumens with the fixture's recommended original lamp; a lower LED wattage does not permit exceeding its recommended light output. Use compatible LED dimming equipment and check its load range. Any fan receiver, photocell, motion sensor or timer must support LED loads. Diode-type hi/lo controls may require the high setting under the manufacturer's guidance. For the 5W class, the manufacturer's thermal guide specifies an enclosure no smaller than 5 × 5 × 5 inches; physical lamp clearance may require more room. Damp-location use still requires protection from direct water. Follow the fixture's temperature and installation limits.
Frequently Asked Questions
What socket and voltage does it need?
Use a compatible G9 loop-pin socket with 100–130V AC (120V nominal). Match the actual socket and supply before ordering.
How much light does it provide?
The published output is 500 lumens at fixed 4000K. Compare lumens and color with the fixture's recommended lamp.
Can it be dimmed?
Yes, with compatible LED dimming equipment. Check the dimmer's load range and any electronic fixture controls before installation.
What dimensions should I check?
Check 2-1/2 inches overall length and 3/4 inches maximum diameter against the socket position, shade opening and available lamp space.
Why Buy from Big Frog Supply?
Select this G9 COB for 500 lumens in 4000K when nearby lighting and the fixture call for a cooler white appearance. The 2-1/2-inch length and 3/4-inch diameter are larger than the 4.5W G9 COB, so compare both brightness and housing clearance before choosing the higher-output model.
Manufacturer part number: EA-G9-5.0W-COB-409F-D
Base: G9 loop-pin
Nominal model wattage: 5W
Published power consumption: 5.0W
Input voltage: 100–130V AC (120V nominal)
Light output: 500 lumens
Color temperature: fixed 4000K
CRI: 90+
Beam distribution: 360°
Material: Ceramic and polycarbonate
Control: Dimmable with compatible LED controls; check the dimmer load range
Rated life: 36,000 hours under current manufacturer guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
Damp-location and enclosed-fixture suitability subject to thermal guidance and protection from direct water exposure
LED design: COB (chip on board)
