EmeryAllen GU10 7W LED Reflector Bulb, 3000K, 36° Beam
Brand: EmeryAllen | SKU: EA-GU10-7.0W-36D-3090-D
Product Overview
The EmeryAllen EA-GU10-7.0W-36D-3090-D supplies 500 lumens of 3000K light with a focused 36° beam. It uses a GU10 twist-lock base for nominal 120V fixtures. Check the 2-3/16-inch overall length, 2-inch reflector diameter and aiming direction before choosing it for accent lighting.
Key Features
- 500 lumens at 3000K.
- GU10 twist-lock base for 100–130V AC (120V nominal).
- 7W model class; 7W published consumption.
- 90+ CRI for color rendering.
- Directional 36° light pattern.
- Ceramic and polycarbonate construction.
Common Uses
Accent, display or directional downlighting in compatible GU10 fixtures that accept a 2-inch reflector face and 36° beam.
Technical Specifications
| Manufacturer part number |
EA-GU10-7.0W-36D-3090-D |
| Base |
GU10 twist-lock base |
| Nominal model wattage |
7W |
| Published power consumption |
7W |
| Input voltage |
100–130V AC (120V nominal) |
| Light output |
500 lumens |
| Color temperature |
3000K |
| Color rendering index |
90+ |
| Beam distribution |
36° directional |
| Material |
Ceramic and polycarbonate |
| Control |
Compatible LED dimmer required |
| Rated life |
36,000 hours under current manufacturer guidance |
| Manufacturer warranty |
Limited lifetime warranty; conditions apply |
| Location suitability |
Damp locations and enclosed fixtures subject to fixture protection and thermal limits; protect from direct water exposure. |
Dimensions
Overall lamp length: 2-3/16 inches. Maximum lamp diameter: 2 inches. Compare both with the socket position, shade opening and available lamp space.
Compatibility & Installation Notes
Match the GU10 socket and 100–130V AC (120V nominal) supply. Turn power off and let the old lamp cool before replacement. Compare lumens with the fixture’s recommended original lamp; lower LED wattage alone does not permit a brighter replacement. Use compatible LED dimming equipment and check its load range. Verify any ceiling-fan receiver, timer, photocell or hi/lo control supports the lamp and LED load. Damp-location and enclosed-fixture use still require protection from direct water and compliance with the manufacturer’s thermal guidance. GU10 twist-lock and GU5.3/MR16 bi-pin connections are different. Do not substitute by reflector appearance or fit a nominal 120V GU10 to a 12V system.
Frequently Asked Questions
What connection and supply does it require?
It uses a GU10 twist-lock base and requires 100–130V AC (120V nominal). Match both the socket and fixture supply.
What beam and output does it provide?
The published output is 500 lumens at 3000K with a 36° beam. Check that a focused pattern suits the intended area.
Can I use it with a dimmer?
Use compatible LED dimming equipment and check the control’s load range and the fixture’s requirements.
What measurements should I check?
Check the 2-3/16-inch overall length and 2-inch maximum diameter against the socket position, shade opening and lamp space.
Why Buy from Big Frog Supply?
Choose the GU10 7W 3000K for a focused 36° beam and 500 lumens in a line-voltage twist-lock fixture. Its 2-inch reflector diameter and 2-3/16-inch overall length establish the fit check. Compare the actual socket with a bi-pin MR16 before ordering; the similar reflector appearance does not make them interchangeable.
Manufacturer part number: EA-GU10-7.0W-36D-3090-D
Base: GU10 twist-lock base
Nominal model wattage: 7W
Published power consumption: 7W
Input voltage: 100–130V AC (120V nominal)
Light output: 500 lumens
Color temperature: 3000K
Color rendering index: 90+
Beam distribution: 36° directional
Material: Ceramic and polycarbonate
Control: Compatible LED dimmer required
Rated life: 36,000 hours under current manufacturer guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
Location suitability: Damp locations and enclosed fixtures subject to fixture protection and thermal limits; protect from direct water exposure.
