EmeryAllen GY6.35 5W Dim-to-Warm LED Bulb, 1800K–2700K
Brand: EmeryAllen | SKU: EA-GY6.35-5.0W-DTW-2718-D
Product Overview
The EmeryAllen EA-GY6.35-5.0W-DTW-2718-D is a GY6.35 LED retrofit for compatible 12V AC/DC systems. It provides 450 lumens with 4.2W published consumption and a 2-1/8-inch overall length. With compatible dimming equipment, the light warms from approximately 2700K toward 1800K as brightness decreases. Match the socket, transformer, controls and physical clearance before ordering.
Key Features
- 450-lumen published output in 1800K–2700K dim-to-warm light.
- GY6.35 bi-pin base with 12V AC/DC input.
- 5W model designation; 4.2W published consumption.
- 92 CRI for color rendering.
- Broad 360° light distribution.
- Ceramic and polycarbonate construction.
Common Uses
Compatible 12V decorative or pendant fixtures requiring a GY6.35 connection, where a warmer appearance at reduced brightness is desired.
Technical Specifications
| Manufacturer part number |
EA-GY6.35-5.0W-DTW-2718-D |
| Base |
GY6.35 bi-pin base |
| Nominal model wattage |
5W |
| Published power consumption |
4.2W |
| Input voltage |
12V AC/DC |
| Light output |
450 lumens |
| Color temperature |
1800K–2700K dim-to-warm |
| Color rendering index |
92 |
| Beam distribution |
360° |
| Material |
Ceramic and polycarbonate |
| Dimming |
Compatible dimmer required; match MLV/ELV dimmer to transformer type |
| Rated life |
36,000 hours under the manufacturer’s current guidance |
| Manufacturer warranty |
Limited lifetime warranty; conditions apply |
| Location suitability |
Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp |
Dimensions
Overall lamp length: 2-1/8 inches. Maximum lamp diameter: 13/16 inches. These are lamp dimensions; the base designation and wattage do not describe the lamp’s overall size.
Compatibility & Installation Notes
Match the exact GY6.35 socket, 12V AC/DC supply and lamp clearance. Turn power off and allow the old lamp to cool before replacement. Compare lumens with the fixture’s recommended original lamp; do not select a brighter LED solely because its electrical wattage is lower. Use a magnetic transformer or LED-compatible no-load/low-load electronic transformer. A halogen transformer may not operate correctly at the reduced LED load. For dimming, match an MLV or ELV dimmer to the transformer type. Damp-location and enclosed-fixture suitability still require the fixture’s protection and the manufacturer’s thermal guidance. Keep the bulb protected from direct water exposure. For this wattage, the manufacturer’s technical guide lists a minimum enclosed shade size of 5 × 5 × 5 inches (125 cubic inches). This dim-to-warm version changes color with dimming; it does not provide independently selectable fixed color temperatures.
Frequently Asked Questions
How does dim-to-warm work?
With compatible dimming equipment, the light becomes warmer as output decreases, moving from approximately 2700K toward 1800K.
What socket and voltage does it need?
It uses a GY6.35 connection and 12V AC/DC input. Do not connect it directly to 120V.
What controls should I check?
Use an LED-compatible magnetic or no-load/low-load electronic transformer and an MLV or ELV dimmer matched to the transformer type. Check operation at the reduced LED load.
How do I check the fit?
Compare the GY6.35 connection, 2-1/8-inch overall length and 13/16-inch diameter with the fixture. Do not substitute a G4 lamp by appearance; its pin spacing differs.
Why Buy from Big Frog Supply?
Choose the GY6.35 5W-class dim-to-warm lamp for a compatible 12V system where light should warm as brightness falls. Its 450-lumen output differs from the fixed-color 550-lumen COB, while the 2-1/8-inch length and 13/16-inch diameter establish the fit check. Match an LED-compatible transformer and dimmer to use its intended color transition.
Manufacturer part number: EA-GY6.35-5.0W-DTW-2718-D
Base: GY6.35 bi-pin base
Nominal model wattage: 5W
Published power consumption: 4.2W
Input voltage: 12V AC/DC
Light output: 450 lumens
Color temperature: 1800K–2700K dim-to-warm
Color rendering index: 92
Beam distribution: 360°
Material: Ceramic and polycarbonate
Dimming: Compatible dimmer required; match MLV/ELV dimmer to transformer type
Rated life: 36,000 hours under the manufacturer’s current guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
Location suitability: Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp
