EmeryAllen PAR16 7W E26 LED Reflector Bulb, 3000K, 36° Beam
Brand: EmeryAllen | SKU: EA-PAR16-7.0W-36D-3090-D
Product Overview
The EmeryAllen EA-PAR16-7.0W-36D-3090-D is a PAR16 LED reflector lamp with an E26 medium screw base for compatible 120V AC fixtures. Its 36° beam directs 500 lumens of 3000K light toward an accent or display area. The 2-3/16-inch overall length and 2-inch reflector diameter help you check clearance and aiming space before ordering.
Key Features
- 500-lumen published output in 3000K light.
- E26 medium screw base with 120V AC input.
- 7W LED power consumption.
- 90+ CRI for color rendering.
- Focused 36° beam for directional lighting.
- Ceramic and polycarbonate construction.
Common Uses
Directional accent and display lighting in compatible 120V E26 fixtures that accept a PAR16 reflector. Check the beam aim and the fixture’s lamp rating when replacing an existing reflector.
Technical Specifications
| Manufacturer part number |
EA-PAR16-7.0W-36D-3090-D |
| Base |
E26 medium screw base |
| Nominal model wattage |
7W |
| Published power consumption |
7W |
| Input voltage |
120V AC |
| Light output |
500 lumens |
| Color temperature |
3000K |
| Color rendering index |
90+ |
| Beam distribution |
36° directional beam |
| Material |
Ceramic and polycarbonate |
| Dimming |
Compatible dimmer required |
| Rated life |
36,000 hours under the manufacturer’s current guidance |
| Manufacturer warranty |
Limited lifetime warranty; conditions apply |
| Location suitability |
Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp |
Dimensions
Overall lamp length: 2-3/16 inches. Maximum lamp diameter: 2 inches. These are lamp dimensions; the base designation and wattage do not describe the lamp’s overall size.
Compatibility & Installation Notes
Match the exact E26 socket, 120V AC supply and lamp clearance. Turn power off and allow the old lamp to cool before replacement. Compare lumens with the fixture’s recommended original lamp; do not select a brighter LED solely because its electrical wattage is lower. Use an LED-compatible dimmer and check its load range and fixture controls. Do not assume every ceiling-fan receiver, timer, photocell or hi/lo switch supports LED loads. Damp-location and enclosed-fixture suitability still require the fixture’s protection and the manufacturer’s thermal guidance. Keep the bulb protected from direct water exposure. Check the 2-inch reflector diameter, overall lamp length and aiming clearance. PAR16 describes the reflector shape; the connection is an E26 screw base. A GU10 reflector uses a different connection.
Frequently Asked Questions
What base and voltage does it need?
It uses an E26 medium screw base for compatible 120V AC fixtures. It does not use a GU10 twist-lock connection.
How wide is the beam?
The published beam angle is 36°. This is a directional reflector lamp, so check its aim and coverage for the intended accent or display.
How bright is the 3000K model?
The published output is 500 lumens at 3000K. Compare output with the fixture’s recommended lamp before replacing it.
What size must the fixture accept?
Allow for a 2-3/16-inch overall lamp length and 2-inch reflector diameter, plus the clearance needed to fit and aim the lamp.
Why Buy from Big Frog Supply?
Choose the PAR16 7W when a compatible E26 fixture needs a focused 36° beam of 3000K light. Its 500-lumen specification supports output comparison, while the 2-inch reflector diameter helps establish fit. Check the 2-3/16-inch overall length and aiming direction before using it for accent or display lighting.
Manufacturer part number: EA-PAR16-7.0W-36D-3090-D
Base: E26 medium screw base
Nominal model wattage: 7W
Published power consumption: 7W
Input voltage: 120V AC
Light output: 500 lumens
Color temperature: 3000K
Color rendering index: 90+
Beam distribution: 36° directional beam
Material: Ceramic and polycarbonate
Dimming: Compatible dimmer required
Rated life: 36,000 hours under the manufacturer’s current guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
Location suitability: Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp
