EmeryAllen 2W S14 Dim-to-Warm LED Filament Bulb, 1800K–2700K, Clear

EmeryAllen 2W S14 Dim-to-Warm LED Filament Bulb, 1800K–2700K, Clear

Brand: EmeryAllen | SKU: EA-S14-2.0W-E26-DTW-2718

Product Overview

The EmeryAllen EA-S14-2.0W-E26-DTW-2718 provides 130 lumens of light that warms from approximately 2700K toward 1800K as brightness decreases. It uses an E26 medium screw base and requires 100–130V AC (120V nominal). The 3-5/16-inch overall length and 1-3/4-inch maximum diameter are the measurements to compare with the fixture. Clear glass gives the lamp its decorative appearance. Match the socket, supply and fixture’s permitted light output before choosing the 2W-class model.

Key Features

• 130 lumens at 1800K–2700K with a warming color transition during dimming.
• E26 medium screw base for 100–130V AC (120V nominal).
• 2W model class; 2W published consumption.
• 96.4 CRI for color rendering.
• All-around 360° light distribution.
• Clear glass and LED filament design.

Common Uses

Decorative E26 fixtures that accept a S14 decorative lamp. Useful where a warmer appearance at reduced brightness is wanted.

Technical Specifications

Dimensions

Overall lamp length: 3-5/16 inches. Maximum lamp diameter: 1-3/4 inches. Compare both with the socket position, shade opening and available lamp space.

Compatibility & Installation Notes

Match the E26 socket and 100–130V AC (120V nominal) supply. Turn power off and let the old lamp cool before replacement. Compare lumens with the fixture’s recommended original lamp; lower LED wattage alone does not permit a brighter replacement. Use compatible LED dimming equipment and check its load range. Verify any ceiling-fan receiver, timer, photocell or hi/lo control supports the lamp and LED load. Damp-location and enclosed-fixture use still require protection from direct water and compliance with the manufacturer’s thermal guidance. The color warms with dimming; it is not a set of independently selectable fixed color temperatures.

Frequently Asked Questions

What connection and supply does it require?

It uses an E26 medium screw base and requires 100–130V AC (120V nominal). Match both the socket and fixture supply.

How much light does it provide?

The published output is 130 lumens with a dim-to-warm range of approximately 1800K–2700K. Compare that output with the fixture’s recommended lamp.

Does the color change as it dims?

Yes. With compatible dimming equipment, the color becomes warmer as output falls, moving from approximately 2700K toward 1800K. Choose a fixed-color model if that transition is not wanted.

What measurements should I check?

Check the 3-5/16-inch overall length and 1-3/4-inch maximum diameter against the socket position, shade opening and lamp space.

Why Buy from Big Frog Supply?

Choose the 120V S14 dim-to-warm lamp for low-output bistro or string-light ambience at 130 lumens. Its clear glass and 3-5/16-inch overall length establish the decorative look, while the 1-3/4-inch diameter helps you check covers and spacing. Confirm line-voltage supply because a separate 12V S14 uses the same E26 screw connection.

Manufacturer part number: EA-S14-2.0W-E26-DTW-2718
Base: E26 medium screw base
Nominal model wattage: 2W
Published power consumption: 2W
Input voltage: 100–130V AC (120V nominal)
Light output: 130 lumens
Color temperature: 1800K–2700K dim-to-warm
Color rendering index: 96.4
Beam distribution: 360°
Material: Glass and aluminum
Control: Compatible LED dimmer required
Rated life: 15,000 hours
Manufacturer warranty: 5-year limited warranty; conditions apply
Glass finish: Clear
Location suitability: Damp locations and enclosed fixtures subject to fixture protection and thermal limits; protect from direct water exposure.

Overall lamp length: 3-5/16 inches. Maximum lamp diameter: 1-3/4 inches. Compare both with the socket position, shade opening and available lamp space.