EmeryAllen 6W T10 tube LED Bulb, 2700K, Clear
Brand: EmeryAllen | SKU: EA-T10-6.0W-E26-300-2790-D
Product Overview
The EmeryAllen EA-T10-6.0W-E26-300-2790-D pairs a T10 tube shape and clear finish with an E26 base. It provides 2700K light for a consistent warm appearance. The 6W-class lamp has a published output of 663 lumens and a 11-13/16-inch overall length. Match its size and electrical requirements to the fixture before ordering.
Key Features
- 663-lumen published output in 2700K light.
- E26 medium screw base with 100–130V AC (120V nominal) input.
- 6W model designation; 5.9W published consumption.
- 94 CRI for color rendering.
- Broad 360° light distribution.
- Clear glass exposes the LED filament design.
Common Uses
Decorative E26 fixtures where the lamp is visible, including compatible pendants, sconces or table lamps. Useful when a visible filament appearance and warm 2700K light are part of the design.
Technical Specifications
| Manufacturer part number | EA-T10-6.0W-E26-300-2790-D |
|---|---|
| Base | E26 medium screw base |
| Nominal model wattage | 6W |
| Published power consumption | 5.9W |
| Input voltage | 100–130V AC (120V nominal) |
| Light output | 663 lumens |
| Color temperature | 2700K |
| Color rendering index | 94 |
| Beam distribution | 360° |
| Material | Glass and aluminum |
| Dimming | Compatible dimmer required |
| Rated life | 15,000 hours |
| Manufacturer warranty | 5-year limited warranty; conditions apply |
| Glass finish | Clear |
| Location suitability | Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp |
Dimensions
Overall lamp length: 11-13/16 inches. Maximum lamp diameter: 1-3/16 inches. These are lamp dimensions; the base designation and wattage do not describe the lamp’s overall size.
Compatibility & Installation Notes
Match the exact E26 socket, 100–130V AC (120V nominal) supply and lamp clearance. Turn power off and allow the old lamp to cool before replacement. Compare lumens with the fixture’s recommended original lamp; do not select a brighter LED solely because its electrical wattage is lower. Use an LED-compatible dimmer and check its load range and fixture controls. Do not assume every ceiling-fan receiver, timer, photocell or hi/lo switch supports LED loads. Damp-location and enclosed-fixture suitability still require the fixture’s protection and the manufacturer’s thermal guidance. Keep the bulb protected from direct water exposure. The length encoded in the model distinguishes this tube from other T10 lengths; verify the full lamp space, including the socket position.
Frequently Asked Questions
What base and voltage does it use?
It uses an E26 base and 100–130V AC input for a nominal 120V fixture.
How bright is this lamp?
The published specification is 663 lumens at 2700K. Match that output to the fixture’s recommended lamp.
Can I use it on a dimmer?
Yes, with compatible LED dimming equipment. Check the dimmer’s load range and any fixture-specific controls.
How do I check the fit?
Compare the E26 connection and 11-13/16-inch overall lamp length with the socket and shade clearance. The maximum lamp diameter is 1-3/16 inches.
Why Buy from Big Frog Supply?
Choose the clear 300mm T10 when a long exposed filament tube is part of the fixture’s design. Its 11-13/16-inch overall length is substantially longer than the 130mm and 225mm versions, and its published output is 663 lumens at 2700K. Check the entire lamp space before choosing it for an E26 socket.