Brand: K-Rain SKU: 10003-RCW
Product Overview
The K-Rain 10003-RCW is the reclaimed-water-identified version of the SuperPro professional gear-driven rotor. It combines purple reclaimed-water identification with Intelligent Flow Technology for irrigation systems supplied by approved non-potable or reclaimed-water sources. The dedicated flow control reduces distance and water flow simultaneously and proportionately and can completely shut off flow at the head while the riser remains extended.
The rotor can be adjusted from 40° to continuous 360°, allowing the same model to serve part-circle and full-circle locations. Current K-Rain literature lists a nominal 26- to 46-foot radius, an overall flow range of approximately 0.8 to 11.1 GPM when flow adjustment is considered, and a 20- to 70-PSI operating range. Standard and low-angle nozzles support a range of turf layouts, while the arc-memory clutch and ratcheting riser simplify field setup and help protect the gear mechanism.
The RCW designation and purple identification help distinguish the rotor from potable-water irrigation components, but they do not by themselves satisfy every local reclaimed-water requirement. Verify required signage, pipe and valve-box marking, separation, backflow protection, and cross-connection safeguards before installation. The base 10003-RCW does not include a check valve unless the model number also includes CV.
Key Features
- Purple identification for reclaimed-water use
- Intelligent Flow proportional radius and flow control
- Full shutoff at the rotor head
- 40° to continuous 360° arc adjustment
- Nominal 26- to 46-foot radius
- Approximate 0.8- to 11.1-GPM overall flow range
- 20- to 70-PSI operating range
- 3/4-inch female NPT inlet
Common Uses
- Approved reclaimed-water turf zones
- Purple-identified residential and commercial irrigation
- Sites needing proportional radius and flow adjustment
- Replacing a matching SuperPro RCW rotor
Compatibility and Installation Notes
Confirm the site is approved for reclaimed-water irrigation and comply with all applicable marking and cross-connection rules. Choose the nozzle from actual pressure and flow, use matched precipitation across the zone, and install the rotor level with finished grade. Add a CV model or compatible check-valve assembly when low-head drainage control is required.
Frequently Asked Questions
Does 10003-RCW include a check valve?
No. The model must include the CV suffix for a factory-installed check valve.
Does purple identification make the installation code compliant?
No. Local rules may require additional pipe marking, signage, separation, and backflow safeguards.
Can the rotor be shut off at the head?
Yes. Intelligent Flow Technology provides full head-level shutoff.
Why Buy the K-Rain 10003-RCW from Big Frog Supply?
This product gives reclaimed-water systems the SuperPro's proportional flow control in the correct purple-identified configuration. Big Frog Supply also carries standard, check-valve, and other reclaimed-water K-Rain components so the rotor can be matched to both the hydraulic and identification requirements.
