DryConn Tan Low-Voltage Waterproof Wire Connectors — 50-Piece Canister
Brand: King Innovation (DryConn)
SKU: 20136
Product Overview
DryConn Tan connectors are pre-filled with a non-hardening petroleum sealant for low-voltage irrigation and underground wire splices. The 50-piece canister provides a ready supply for projects with multiple copper-wire connections.
Key Features
- Waterproof, corrosion-resistant filled twist-on connection.
- One-step installation without pre-twisting conductors.
- 50 Tan connectors per canister.
- Made in the USA.
Common Uses
Underground low-voltage irrigation wiring and other low-voltage outdoor copper-wire splices within the specified 30 V / 10 A limit.
Technical Specifications
- Maximum electrical rating: 30 V / 10 A.
- Wire type: copper-to-copper; approved combinations span #22 AWG minimum to #6 AWG maximum.
- Temperature rating: 75°C (167°F).
- Sealant: petroleum based, non-hardening.
Dimensions
Connector size: 13/16 × 1 9/16 in. Manufacturer drawing measurements: A 1.563 in, B 0.813 in, C 0.656 in, D 0.656 in.
Compatibility & Installation Notes
Turn off power and follow local and national codes. Check the manufacturer's approved conductor combinations rather than assuming every wire mix within the overall range is supported. Strip wires 5/8 in; align conductors, slightly twist and lead stranded wires, insert evenly and twist the connector until tight. Do not over-torque or reuse.
Frequently Asked Questions
Is the Tan connector suitable for underground splices?
Yes. King specifies it for underground low-voltage applications within the 30 V / 10 A rating.
Does the connection require pre-twisting?
No pre-twisting is needed for installation, though the manufacturer says to slightly twist and lead stranded conductors.
Can I use this on higher-voltage building wire?
No higher-voltage rating is listed for the Tan low-voltage connector; use it within 30 V / 10 A.
Why Buy This Package
The 50-piece canister suits irrigation jobs with many splices and uses the Tan petroleum-filled connector for the specified low-voltage wire range.
