Product Overview
The Vu-Flow NT200-24P is a complete NT-series T-style sediment filter with 2 in. slip connections and a reusable 24-mesh polyester screen. Its approximately 711-micron opening helps you match the filter to suspended particles in your water and the needs of downstream equipment.
Select this 2 in. model for a system operating within its 18–100 GPM catalog flow range. The clear sump lets you see sediment buildup, and the bottom purge valve provides access for routine flushing. Finer screens can require more frequent cleaning when the water carries a heavy sediment load.
Key Features
- 24-mesh reusable polyester element
- 2 in. slip inlet and outlet
- 180° in-line T-style body
- Clear sump and bottom purge valve
Common Uses
- Sediment pre-filtration for compatible water systems
- Irrigation systems and downstream valve protection
- Well-water sand and grit filtration where the selected mesh suits the sediment
Technical Specifications
- Model: NT200-24P
- Series: NT T-style screen filter
- Inlet/outlet: 2 in. slip
- Screen: 24 mesh polyester
- Approximate mesh opening: 711 microns
- Catalog flow range: 18–100 GPM; lower limit is the minimum for spin-out action
- Maximum pressure: 150 PSI at 73°F
- Maximum temperature: 100°F at 40 PSI
- Cleanout: 1/2 in. with purge valve
- Service: Water only
Dimensions
- Overall catalog dimensions: 17-7/8 in. L × 5-1/2 in. W
Compatibility & Installation Notes
- Install after the pump pressure switch; do not place a filter with a purge valve on the suction side of the pump.
- Follow the flow direction and leave room below the sump for servicing. Isolate and depressurize before disassembly.
- Match mesh to the sediment and downstream equipment; this sediment screen does not treat dissolved contaminants or disinfect water.
- Manufacturer photo shows the NT filter family. This listing is for one NT200-24P filter.
Frequently Asked Questions
What connections does this filter have?
The NT200-24P has 2 in. slip inlet and outlet connections.
What does the mesh rating mean?
The 24-mesh polyester screen has an approximate 711-micron opening. Select it to suit the suspended sediment and downstream equipment.
Can the screen be cleaned and reused?
Yes. Flush collected sediment through the purge valve and, when needed, isolate and depressurize the system before removing the cover for cleaning.
Does it remove dissolved contaminants?
No. It screens suspended sediment; it does not remove dissolved contaminants or disinfect water.
Why Buy from Big Frog Supply
The NT200-24P combines 2 in. slip connections with a 24-mesh screen, so both the piping fit and particle opening are defined before you order. Its 18–100 GPM flow range helps you choose the right body size, while the clear sump and purge valve support accessible sediment checks and flushing.
