Product Overview
The Armada Technologies PRO12 is a pocket-size field tool for checking. Standard 12V Lighting, 24V AC irrigation solenoids without relying on the installed controller. It can apply a pulsed DC output that operates a compatible valve solenoid, helping a technician separate valve or solenoid problems from controller and field-wiring problems. A continuity indicator also provides a quick check that the connected circuit is present.
The chatter setting repeatedly pulses the solenoid to create sound and vibration that may help locate a buried valve box. The tool uses two 9V batteries and has a three-position toggle with a red status LED. It is intended for compatible Standard 12V Lighting, 24V AC irrigation solenoids; it should not be connected to energized line-voltage wiring.
Key Features:
- Portable Two range settings allow the detection of low and high voltages like 12 volts AC and 120 volts AC in a single unit.
- Senses Active 12-Volt Lighting, 24-35-Volt Irrigation and Main 120-Volt Powe
- Continuity indicator
- Valve-chatter locating mode
- Three-position toggle switch
- Less than 1 lb
Common Uses:
- Checking Standard 12V Lighting, 24V AC irrigation solenoids
- Operating a valve independently of the installed controller
- Separating controller, field-wiring, valve, and solenoid problems
- Helping locate buried valve boxes with chatter mode
Technical Specifications:
-
Compatibility: Standard 12V Lighting, 24V AC irrigation solenoids
-
Power: Two 9V alkaline batteries, not included
-
Output: Pulsed 18-24V DC equivalent
-
Indicator: Red LED
Use Notes:
Disconnect or isolate the field circuit as directed in the manual before connecting the tool.
FAQ:
Can it help locate a valve?
Yes, chatter mode can create sound and vibration at a compatible solenoid.
Are batteries included?
No.
Why Buy From Big Frog Supply?
Big Frog Supply provides clear product information, helpful support, and convenient online ordering for irrigation service tools.
