Brilliance Glacier Perforated Hanging Down Light
The Glacier Hanging Down Light works with MR16 lamps or MR16 Chameleon lamps. It features a frosted shade perfect for projecting soft RGBW light.
Fixture Finish Maintenance
The Glacier fixture is available in the following finishes with a frosted acrylic shade: machined copper, brass, or blackened brass. These metals offer a beautiful living finish that weathers over time to a unique patina. If you prefer to maintain the original finish, we recommend wiping down the fixture periodically with a light oil, such as WD-40.
|GLACIER HANGING DOWN LIGHT|
|Use||Downlighting Techniques in Trees or Architecture by Hanging on a Chain or Cable|
|Includes||LightingShrink Professional Crimp and Heat Shrink Cable Connector
Includes Chameleon MR16 When Purchased with a Lamp
|Lamp||MR16 or Chameleon MR16 for RGBW Applications|
|Finish||Brass, Copper, or Blackened Brass|
INSTALLING THE FIXTURE
Unscrew the fixture body from the base.
Remove the stainless-steel snap ring from the lamp holder.
Install the lamp in the socket
Lay the front of the lamp inside the brass lamp holder and install the snap ring on the back-side lip of the MR16 lamp
Install the snap ring
Reinstall the lamp holder into the fixture body.
HANGING THE FIXTURE
IMPORTANT: DO NOT INSTALL ON OR NEAR ANY HIGH VOLTAGE POWER LINES
Hang the fixture from a secure stainless steel eye bolt, with or without a chain.
Create a drip loop with the wire by bending the wire to a slope one inch below the fixture cap