DIG Irrigation 07-062 A-jet, 180° Adjustable Spray Jet, Threaded Barb

The A-Jet adjustable micro sprayers incorporate an adjustable micro valve that allows control of flow and diameter to reduce or increase the wetting area. The micro sprayers are ideal for areas where low-flow overhead irrigation is desired or for areas where drip emitters or conventional sprinkler systems are not practical.

Features

• Available in three spray patterns of 90°, 180° and 360° for individual plants or closely spaced plantings
• Recommended for flowerbeds, groundcovers, shrubs or for areas where low-flow overhead irrigation is desired
• Easily adjusted to suite irregularly shaped areas
• Efficient and reliable method to apply water
• Low flow with fine spray droplets
• No moving parts
• Available on 10/32 thread or complete assembly with 13” spike, 12? PE riser and barb
• Removable cap for easy cleaning
• Constructed of UV-resistant, durable plastic material

Specifications

• Adjustable flow rate from 0-28.6 GPH (0-108 L/H)
• Operating pressure: 10-30 PSI (.7-2.0 BAR)
• Wetting diameter: up to 23' (7.0 m)
• Pattern: 360°, 180° and 90°
• Trajectory: approximately 40°
• Filter requirement: minimum of 80 mesh
• Material: *Stake: polypropylene
  • 12" PE riser: polyethylene
  • Micro sprinkler: high-impact plastic

Adjustable flow rate from 0-28.6 GPH (0-108 L/H)
Operating pressure: 10-30 PSI (.7-2.0 BAR)
Wetting diameter: up to 23' (7.0 m)
Pattern: 360°, 180° and 90°
Trajectory: approximately 40°
Filter requirement: minimum of 80 mesh
Material: *Stake: polypropylene
12" PE riser: polyethylene
Micro sprinkler: high-impact plastic