EmeryAllen 2.5W E12 COB LED Retrofit Bulb, 2700K
Brand: EmeryAllen | SKU: EA-E12-2.5W-COB-279F-D
Product Overview
The EmeryAllen EA-E12-2.5W-COB-279F-D provides 250 lumens of 2700K light. It uses an E12 candelabra screw base and requires 100–130V AC (120V nominal). The 1-7/8-inch overall length and 5/8-inch maximum diameter are the measurements to compare with the fixture. Its chip-on-board design has a 2.5W model designation with 2.5W published consumption; check the full model when comparing standard retrofits.
Key Features
- 250 lumens at 2700K.
- E12 candelabra screw base for 100–130V AC (120V nominal).
- 2.5W model class; 2.5W published consumption.
- 90+ CRI for color rendering.
- All-around 360° light distribution.
- COB light source with ceramic/polycarbonate construction.
Common Uses
Compatible decorative pendants, ceiling or display fixtures using an E12 connection. Check permitted output and temperature as well as physical fit.
Technical Specifications
| Manufacturer part number |
EA-E12-2.5W-COB-279F-D |
| Base |
E12 candelabra screw base |
| Nominal model wattage |
2.5W |
| Published power consumption |
2.5W |
| Input voltage |
100–130V AC (120V nominal) |
| Light output |
250 lumens |
| Color temperature |
2700K |
| Color rendering index |
90+ |
| Beam distribution |
360° |
| Material |
Ceramic and polycarbonate |
| Control |
Compatible LED dimmer required |
| Rated life |
36,000 hours under current manufacturer guidance |
| Manufacturer warranty |
Limited lifetime warranty; conditions apply |
| LED design |
COB (chip on board) |
| Location suitability |
Damp locations and enclosed fixtures subject to fixture protection and thermal limits; protect from direct water exposure. |
Dimensions
Overall lamp length: 1-7/8 inches. Maximum lamp diameter: 5/8 inches. Compare both with the socket position, shade opening and available lamp space.
Compatibility & Installation Notes
Match the E12 socket and 100–130V AC (120V nominal) supply. Turn power off and let the old lamp cool before replacement. Compare lumens with the fixture’s recommended original lamp; lower LED wattage alone does not permit a brighter replacement. Use compatible LED dimming equipment and check its load range. Verify any ceiling-fan receiver, timer, photocell or hi/lo control supports the lamp and LED load. E12 candelabra and E11 mini-candelabra are different screw sizes; match the actual socket. Damp-location and enclosed-fixture use still require protection from direct water and compliance with the manufacturer’s thermal guidance. For this model wattage, the manufacturer’s guide lists a minimum enclosed shade size of 2.5 × 2.5 × 2.5 inches (16 cubic inches).
Frequently Asked Questions
What connection and supply does it require?
It uses an E12 candelabra screw base and requires 100–130V AC (120V nominal). Match both the socket and fixture supply.
How much light does it provide?
The published output is 250 lumens at fixed 2700K. Compare that output with the fixture’s recommended lamp.
Can I use it with a dimmer?
Use compatible LED dimming equipment and check the control’s load range and the fixture’s requirements.
What measurements should I check?
Check the 1-7/8-inch overall length and 5/8-inch maximum diameter against the socket position, shade opening and lamp space.
Why Buy from Big Frog Supply?
Choose the E12 2.5W COB 2700K for a compact candelabra retrofit with 250 lumens. Its 1-7/8-inch length and 5/8-inch diameter give a useful clearance check in a small decorative fitting. Confirm the full COB part number rather than borrowing dimensions from the standard E12 2.5W or the separate dim-to-warm model.
Manufacturer part number: EA-E12-2.5W-COB-279F-D
Base: E12 candelabra screw base
Nominal model wattage: 2.5W
Published power consumption: 2.5W
Input voltage: 100–130V AC (120V nominal)
Light output: 250 lumens
Color temperature: 2700K
Color rendering index: 90+
Beam distribution: 360°
Material: Ceramic and polycarbonate
Control: Compatible LED dimmer required
Rated life: 36,000 hours under current manufacturer guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
LED design: COB (chip on board)
Location suitability: Damp locations and enclosed fixtures subject to fixture protection and thermal limits; protect from direct water exposure.
