EmeryAllen 5W E12 LED Retrofit Bulb, 4000K
Brand: EmeryAllen | SKU: EA-E12-5.0W-001-409F-D
Product Overview
The EmeryAllen EA-E12-5.0W-001-409F-D is a 5W LED replacement with an E12 candelabra screw base for 120V fixtures. It supplies 550 lumens of 4000K light in a 2-1/2-inch-long lamp. Choose it by the fixture’s socket, permitted light output and available clearance, then check the dimming equipment for the installation.
Key Features
- 550-lumen published output in 4000K light.
- E12 candelabra screw base with 100–130V AC (120V nominal) input.
- 5W LED power consumption.
- 90+ CRI for color rendering.
- Broad 360° light distribution.
- Ceramic and polycarbonate construction.
Common Uses
Compatible decorative, ceiling, pendant or display lighting that requires an E12 base and allows 550 lumens. Fixture suitability depends on clearance, temperature and the lamp rating; a matching base alone does not establish suitability for an appliance or specialty installation.
Technical Specifications
| Manufacturer part number |
EA-E12-5.0W-001-409F-D |
| Base |
E12 candelabra screw base |
| Nominal model wattage |
5W |
| Published power consumption |
5W |
| Input voltage |
100–130V AC (120V nominal) |
| Light output |
550 lumens |
| Color temperature |
4000K |
| Color rendering index |
90+ |
| Beam distribution |
360° |
| Material |
Ceramic and polycarbonate |
| Dimming |
Compatible dimmer required |
| Rated life |
36,000 hours under the manufacturer’s current guidance |
| Manufacturer warranty |
Limited lifetime warranty; conditions apply |
| Location suitability |
Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp |
Dimensions
Overall lamp length: 2-1/2 inches. Check the available width at the socket and shade opening against the lamp drawing before ordering. These are lamp dimensions; the base designation and wattage do not describe the lamp’s overall size.
Compatibility & Installation Notes
Match the exact E12 socket, 100–130V AC (120V nominal) supply and lamp clearance. Turn power off and allow the old lamp to cool before replacement. Compare lumens with the fixture’s recommended original lamp; do not select a brighter LED solely because its electrical wattage is lower. Use an LED-compatible dimmer and check its load range and fixture controls. Do not assume every ceiling-fan receiver, timer, photocell or hi/lo switch supports LED loads. Damp-location and enclosed-fixture suitability still require the fixture’s protection and the manufacturer’s thermal guidance. Keep the bulb protected from direct water exposure. For this wattage, the manufacturer’s technical guide lists a minimum enclosed shade size of 5 × 5 × 5 inches (125 cubic inches).
Frequently Asked Questions
What base and voltage does it use?
It uses an E12 base and 100–130V AC input for a nominal 120V fixture.
How bright is this lamp?
The published specification is 550 lumens at 4000K. Match that output to the fixture’s recommended lamp.
Can I use it on a dimmer?
Yes, with compatible LED dimming equipment. Check the dimmer’s load range and any fixture-specific controls.
How do I check the fit?
Compare the E12 connection and 2-1/2-inch overall lamp length with the socket and shade clearance. Check the lamp drawing for width and installation clearance.
Why Buy from Big Frog Supply?
Choose the standard E12 5W 4000K for a cooler light appearance at 550 lumens. Its 2-1/2-inch overall length is shorter than the higher-output E12 7W and 9.5W lamps. Match nearby lighting color and check shade width before choosing it for a compact candelabra-base fixture.
Manufacturer part number: EA-E12-5.0W-001-409F-D
Base: E12 candelabra screw base
Nominal model wattage: 5W
Published power consumption: 5W
Input voltage: 100–130V AC (120V nominal)
Light output: 550 lumens
Color temperature: 4000K
Color rendering index: 90+
Beam distribution: 360°
Material: Ceramic and polycarbonate
Dimming: Compatible dimmer required
Rated life: 36,000 hours under the manufacturer’s current guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
Location suitability: Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp
