EmeryAllen 6W E17 LED Retrofit Bulb, 3000K
Brand: EmeryAllen | SKU: EA-E17-6.0W-001-309F-D
Product Overview
The EmeryAllen EA-E17-6.0W-001-309F-D provides 600 lumens of 3000K light. It uses an E17 intermediate screw base and requires 100–130V AC (120V nominal). The 2-1/2-inch overall length and 13/16-inch maximum diameter are the measurements to compare with the fixture. Match the socket, supply and fixture’s permitted light output before choosing the 6W-class model.
Key Features
- 600 lumens at 3000K.
- E17 intermediate screw base for 100–130V AC (120V nominal).
- 6W model class; 6W published consumption.
- 90+ CRI for color rendering.
- All-around 360° light distribution.
- Ceramic and polycarbonate construction.
Common Uses
Compatible decorative pendants, ceiling or display fixtures using an E17 connection. Check permitted output and temperature as well as physical fit.
Technical Specifications
| Manufacturer part number |
EA-E17-6.0W-001-309F-D |
| Base |
E17 intermediate screw base |
| Nominal model wattage |
6W |
| Published power consumption |
6W |
| Input voltage |
100–130V AC (120V nominal) |
| Light output |
600 lumens |
| Color temperature |
3000K |
| Color rendering index |
90+ |
| Beam distribution |
360° |
| Material |
Ceramic and polycarbonate |
| Control |
Compatible LED dimmer required |
| Rated life |
36,000 hours under current manufacturer guidance |
| Manufacturer warranty |
Limited lifetime warranty; conditions apply |
| Location suitability |
Damp locations and enclosed fixtures subject to fixture protection and thermal limits; protect from direct water exposure. |
Dimensions
Overall lamp length: 2-1/2 inches. Maximum lamp diameter: 13/16 inches. Compare both with the socket position, shade opening and available lamp space.
Compatibility & Installation Notes
Match the E17 socket and 100–130V AC (120V nominal) supply. Turn power off and let the old lamp cool before replacement. Compare lumens with the fixture’s recommended original lamp; lower LED wattage alone does not permit a brighter replacement. Use compatible LED dimming equipment and check its load range. Verify any ceiling-fan receiver, timer, photocell or hi/lo control supports the lamp and LED load. E17 intermediate, E12 candelabra and E26 medium sockets are different sizes. A matching base does not establish suitability for an oven or other high-temperature appliance. Damp-location and enclosed-fixture use still require protection from direct water and compliance with the manufacturer’s thermal guidance. For this model wattage, the manufacturer’s guide lists a minimum enclosed shade size of 5 × 5 × 5 inches (125 cubic inches).
Frequently Asked Questions
What connection and supply does it require?
It uses an E17 intermediate screw base and requires 100–130V AC (120V nominal). Match both the socket and fixture supply.
How much light does it provide?
The published output is 600 lumens at fixed 3000K. Compare that output with the fixture’s recommended lamp.
Can I use it with a dimmer?
Use compatible LED dimming equipment and check the control’s load range and the fixture’s requirements.
What measurements should I check?
Check the 2-1/2-inch overall length and 13/16-inch maximum diameter against the socket position, shade opening and lamp space.
Why Buy from Big Frog Supply?
Choose the E17 6W 3000K for 600 lumens through an intermediate screw base. Its 2-1/2-inch length and 13/16-inch diameter help you check a pendant or specialty shade. Confirm the E17 thread and fixture temperature rating instead of assuming it fits an E12 socket or high-temperature appliance.
Manufacturer part number: EA-E17-6.0W-001-309F-D
Base: E17 intermediate screw base
Nominal model wattage: 6W
Published power consumption: 6W
Input voltage: 100–130V AC (120V nominal)
Light output: 600 lumens
Color temperature: 3000K
Color rendering index: 90+
Beam distribution: 360°
Material: Ceramic and polycarbonate
Control: Compatible LED dimmer required
Rated life: 36,000 hours under current manufacturer guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
Location suitability: Damp locations and enclosed fixtures subject to fixture protection and thermal limits; protect from direct water exposure.
