EmeryAllen G9 5W Dim-to-Warm LED Bulb, 1800K–2700K
Brand: EmeryAllen | SKU: EA-G9-5.0W-DTW-2718-D
Product Overview
The EmeryAllen EA-G9-5.0W-DTW-2718-D is a G9 LED retrofit for compatible 120V AC fixtures. It provides 450 lumens in a 2-1/2-inch-long lamp. With compatible dimming equipment, the light warms from approximately 2700K toward 1800K as brightness decreases. Match the socket, available clearance and desired color-changing dimming behavior before ordering.
Key Features
- 450-lumen published output in 1800K–2700K dim-to-warm light.
- G9 loop-pin base with 120V AC input.
- 5W LED power consumption.
- 90+ CRI for color rendering.
- Broad 360° light distribution.
- Ceramic and polycarbonate construction.
Common Uses
Compatible decorative G9 fixtures where warmer light at lower brightness suits the room. Check the fixture’s permitted output, clearance and LED-compatible controls.
Technical Specifications
| Manufacturer part number |
EA-G9-5.0W-DTW-2718-D |
| Base |
G9 loop-pin base |
| Nominal model wattage |
5W |
| Published power consumption |
5W |
| Input voltage |
120V AC |
| Light output |
450 lumens |
| Color temperature |
1800K–2700K dim-to-warm |
| Color rendering index |
90+ |
| Beam distribution |
360° |
| Material |
Ceramic and polycarbonate |
| Dimming |
Compatible dimmer required |
| Rated life |
36,000 hours under the manufacturer’s current guidance |
| Manufacturer warranty |
Limited lifetime warranty; conditions apply |
| Location suitability |
Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp |
Dimensions
Overall lamp length: 2-1/2 inches. Maximum lamp diameter: 3/4 inches. These are lamp dimensions; the base designation and wattage do not describe the lamp’s overall size.
Compatibility & Installation Notes
Match the exact G9 socket, 120V AC supply and lamp clearance. Turn power off and allow the old lamp to cool before replacement. Compare lumens with the fixture’s recommended original lamp; do not select a brighter LED solely because its electrical wattage is lower. Use an LED-compatible dimmer and check its load range and fixture controls. Do not assume every ceiling-fan receiver, timer, photocell or hi/lo switch supports LED loads. Damp-location and enclosed-fixture suitability still require the fixture’s protection and the manufacturer’s thermal guidance. Keep the bulb protected from direct water exposure. For this wattage, the manufacturer’s technical guide lists a minimum enclosed shade size of 5 × 5 × 5 inches (125 cubic inches). This dim-to-warm version changes color with dimming; it does not provide independently selectable fixed color temperatures.
Frequently Asked Questions
What does dim-to-warm do?
With compatible dimming equipment, the light becomes warmer as output decreases, moving from approximately 2700K toward 1800K.
What socket and voltage does it need?
It uses a G9 connection and requires 120V AC. It must not be fitted to a 12V system.
How large is the lamp?
The overall length is 2-1/2 inches and maximum diameter is 3/4 inches. Check both against the fixture clearance.
Does it stay at one color while dimming?
No. This lamp changes color with dimming. Choose a fixed-color model when you want a constant color temperature at lower brightness.
Why Buy from Big Frog Supply?
Choose the G9 5W dim-to-warm lamp for 450 lumens and light that warms from 2700K toward 1800K as it dims. Its 2-1/2-inch length and 3/4-inch diameter need more space than the 2.5W DTW G9. Match both clearance and the desired dimming behavior before selecting it over a fixed-color COB.
Manufacturer part number: EA-G9-5.0W-DTW-2718-D
Base: G9 loop-pin base
Nominal model wattage: 5W
Published power consumption: 5W
Input voltage: 120V AC
Light output: 450 lumens
Color temperature: 1800K–2700K dim-to-warm
Color rendering index: 90+
Beam distribution: 360°
Material: Ceramic and polycarbonate
Dimming: Compatible dimmer required
Rated life: 36,000 hours under the manufacturer’s current guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
Location suitability: Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp
