EmeryAllen 5W GY6.35 LED Retrofit Bulb, 2700K
Brand: EmeryAllen | SKU: EA-GY6.35-5.0W-001-279F-D
Product Overview
The EmeryAllen EA-GY6.35-5.0W-001-279F-D is a 5W LED replacement with a GY6.35 bi-pin base for 12V lighting systems. It supplies 550 lumens of 2700K light in a 2-inch-long lamp. Choose it by the fixture’s socket, permitted light output and available clearance, then check the dimming equipment for the installation.
Key Features
- 550-lumen published output in 2700K light.
- GY6.35 bi-pin base with 12V AC/DC input.
- 5W LED power consumption.
- 90+ CRI for color rendering.
- Broad 360° light distribution.
- Ceramic and polycarbonate construction.
Common Uses
Compatible 12V pendants and interior specialty lighting that requires a GY6.35 base and allows 550 lumens. Fixture suitability depends on clearance, temperature and the lamp rating; a matching base alone does not establish suitability for an appliance or specialty installation.
Technical Specifications
| Manufacturer part number |
EA-GY6.35-5.0W-001-279F-D |
| Base |
GY6.35 bi-pin base |
| Nominal model wattage |
5W |
| Published power consumption |
5W |
| Input voltage |
12V AC/DC |
| Light output |
550 lumens |
| Color temperature |
2700K |
| Color rendering index |
90+ |
| Beam distribution |
360° |
| Material |
Ceramic and polycarbonate |
| Dimming |
Compatible dimmer required; match MLV/ELV dimmer to transformer type |
| Rated life |
36,000 hours under the manufacturer’s current guidance |
| Manufacturer warranty |
Limited lifetime warranty; conditions apply |
| Location suitability |
Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp |
Dimensions
Overall lamp length: 2 inches. Maximum lamp diameter: 13/16 inches. These are lamp dimensions; the base designation and wattage do not describe the lamp’s overall size.
Compatibility & Installation Notes
Match the exact GY6.35 socket, 12V AC/DC supply and lamp clearance. Turn power off and allow the old lamp to cool before replacement. Compare lumens with the fixture’s recommended original lamp; do not select a brighter LED solely because its electrical wattage is lower. Use a magnetic transformer or LED-compatible no-load/low-load electronic transformer. A halogen transformer may not operate correctly at the reduced LED load. For dimming, match an MLV or ELV dimmer to the transformer type. Damp-location and enclosed-fixture suitability still require the fixture’s protection and the manufacturer’s thermal guidance. Keep the bulb protected from direct water exposure. For this wattage, the manufacturer’s technical guide lists a minimum enclosed shade size of 5 × 5 × 5 inches (125 cubic inches).
Frequently Asked Questions
What base and voltage does it use?
It uses a GY6.35 base and 12V AC/DC input. It must not be connected directly to 120V.
How bright is this lamp?
The published specification is 550 lumens at 2700K. Match that output to the fixture’s recommended lamp.
Can I use it on a dimmer?
Yes, with a compatible MLV or ELV dimmer and an LED-compatible transformer matched to the system.
How do I check the fit?
Compare the GY6.35 connection and 2-inch overall lamp length with the socket and shade clearance. The maximum lamp diameter is 13/16 inches.
Why Buy from Big Frog Supply?
Choose the GY6.35 5W for a compatible 12V system needing 550 lumens of 2700K light. Its 2-inch overall length and 13/16-inch diameter help you check a small pendant or specialty shade. Confirm an LED-compatible transformer that works at the reduced lamp load before replacing a halogen bulb.
Manufacturer part number: EA-GY6.35-5.0W-001-279F-D
Base: GY6.35 bi-pin base
Nominal model wattage: 5W
Published power consumption: 5W
Input voltage: 12V AC/DC
Light output: 550 lumens
Color temperature: 2700K
Color rendering index: 90+
Beam distribution: 360°
Material: Ceramic and polycarbonate
Dimming: Compatible dimmer required; match MLV/ELV dimmer to transformer type
Rated life: 36,000 hours under the manufacturer’s current guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
Location suitability: Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp
