EmeryAllen 5W R7S LED Retrofit Bulb, 2700K
Brand: EmeryAllen | SKU: EA-R7S-5.0W-2780-D
Product Overview
The EmeryAllen EA-R7S-5.0W-2780-D is a 5W double-ended R7S LED replacement for compatible 120V AC fixtures. It supplies 550 lumens of warm 2700K light in a 3-1/8-inch overall length. Check the spacing of both recessed-contact lampholders and the room around the LED body before ordering.
Key Features
- 550-lumen published output in 2700K light.
- R7S double-ended recessed-contact base with 120V AC input.
- 5W LED power consumption.
- 80+ CRI for color rendering.
- Broad 360° light distribution.
- Ceramic and polycarbonate construction.
Common Uses
Compatible decorative, ceiling, pendant or display lighting that requires a R7S base and allows 550 lumens. Fixture suitability depends on clearance, temperature and the lamp rating; a matching base alone does not establish suitability for an appliance or specialty installation.
Technical Specifications
| Manufacturer part number |
EA-R7S-5.0W-2780-D |
| Base |
R7S double-ended recessed-contact base |
| Nominal model wattage |
5W |
| Published power consumption |
5W |
| Input voltage |
120V AC |
| Light output |
550 lumens |
| Color temperature |
2700K |
| Color rendering index |
80+ |
| Beam distribution |
360° |
| Material |
Ceramic and polycarbonate |
| Dimming |
Compatible dimmer required |
| Rated life |
36,000 hours under the manufacturer’s current guidance |
| Manufacturer warranty |
Limited lifetime warranty; conditions apply |
| Location suitability |
Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp |
Dimensions
Overall lamp length: 3-1/8 inches. Check the available width at the socket and shade opening against the lamp drawing before ordering. These are lamp dimensions; the base designation and wattage do not describe the lamp’s overall size.
Compatibility & Installation Notes
Match the exact R7S socket, 120V AC supply and lamp clearance. Turn power off and allow the old lamp to cool before replacement. Compare lumens with the fixture’s recommended original lamp; do not select a brighter LED solely because its electrical wattage is lower. Use an LED-compatible dimmer and check its load range and fixture controls. Do not assume every ceiling-fan receiver, timer, photocell or hi/lo switch supports LED loads. Damp-location and enclosed-fixture suitability still require the fixture’s protection and the manufacturer’s thermal guidance. Keep the bulb protected from direct water exposure. For this wattage, the manufacturer’s technical guide lists a minimum enclosed shade size of 5 × 5 × 5 inches (125 cubic inches). R7S lamps come in different lengths. Confirm both end contacts and the fixture’s lampholder spacing; do not force the lamp into a fitting for a different length. The LED body needs clearance from the reflector and protective cover.
Frequently Asked Questions
What base and voltage does it use?
It uses a R7S base and 120V AC input.
How bright is this lamp?
The published specification is 550 lumens at 2700K. Match that output to the fixture’s recommended lamp.
Can I use it on a dimmer?
Yes, with compatible LED dimming equipment. Check the dimmer’s load range and any fixture-specific controls.
How do I check the fit?
Compare the R7S connection and 3-1/8-inch overall lamp length with the socket and shade clearance. Check the lamp drawing for width and installation clearance.
Why Buy from Big Frog Supply?
Choose the 5W R7S for a compatible 120V double-ended fixture needing 550 lumens of 2700K light. Its 3-1/8-inch overall length is a different fit from the 4-5/8-inch 8W R7S. Check both contact positions and LED-body clearance before choosing by wattage or base name alone.
Manufacturer part number: EA-R7S-5.0W-2780-D
Base: R7S double-ended recessed-contact base
Nominal model wattage: 5W
Published power consumption: 5W
Input voltage: 120V AC
Light output: 550 lumens
Color temperature: 2700K
Color rendering index: 80+
Beam distribution: 360°
Material: Ceramic and polycarbonate
Dimming: Compatible dimmer required
Rated life: 36,000 hours under the manufacturer’s current guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
Location suitability: Damp locations and enclosed fixtures subject to installation and thermal limits; not a bare wet-location lamp
