EmeryAllen R7S 8W Dimmable LED Bulb, 3000K, 4-5/8-inch
Brand: EmeryAllen | SKU: EA-R7S-8.0W-3080-D
Product Overview
The EmeryAllen EA-R7S-8.0W-3080-D is a dimmable double-ended R7S retrofit for compatible 120V AC fixtures. It provides 900 lumens of 3000K light, with a 4-5/8-inch overall length and 3/4-inch drawing body width. Match the two lampholders and available body space before selecting a replacement.
Key Features
- 900 lumens at 3000K.
- R7S double-ended contacts for 120V AC.
- 8W model class; 8W published consumption.
- 80+ CRI for color rendering.
- All-around 360° light distribution.
- Ceramic and polycarbonate construction.
Common Uses
Compatible double-ended R7S fixtures, including suitable sconces or linear-lamp housings. Match lampholder spacing, full body clearance, permitted light output and LED-compatible controls.
Technical Specifications
| Manufacturer part number |
EA-R7S-8.0W-3080-D |
| Base |
R7S double-ended contacts |
| Nominal model wattage |
8W |
| Published power consumption |
8W |
| Input voltage |
120V AC |
| Light output |
900 lumens |
| Color temperature |
3000K |
| Color rendering index |
80+ |
| Beam distribution |
360° |
| Material |
Ceramic and polycarbonate |
| Control |
Compatible LED dimmer required |
| Rated life |
36,000 hours under current manufacturer guidance |
| Manufacturer warranty |
Limited lifetime warranty; conditions apply |
| Location suitability |
Damp locations and enclosed fixtures subject to fixture protection and thermal limits; protect from direct water exposure. |
Dimensions
Overall lamp length: 4-5/8 inches. Body width shown on manufacturer drawing: 3/4 inch. The drawing does not publish the other cross-section dimension; check full housing clearance and both lampholders.
Compatibility & Installation Notes
Match the R7S socket and 120V AC supply. Turn power off and let the old lamp cool before replacement. Compare lumens with the fixture’s recommended original lamp; lower LED wattage alone does not permit a brighter replacement. Use compatible LED dimming equipment and check its load range. Verify any ceiling-fan receiver, timer, photocell or hi/lo control supports the lamp and LED load. Damp-location and enclosed-fixture use still require protection from direct water and compliance with the manufacturer’s thermal guidance. R7S overall length must match the two lampholders. Confirm full body clearance and both recessed end contacts; another R7S length is a different fit.
Frequently Asked Questions
What connection and supply does it require?
It uses a R7S double-ended contacts and requires 120V AC. Match both the socket and fixture supply.
How much light does it provide?
The published output is 900 lumens at fixed 3000K. Compare that output with the fixture’s recommended lamp.
Can I use it with a dimmer?
Use compatible LED dimming equipment and check the control’s load range and the fixture’s requirements.
How do I check the double-ended fit?
Confirm the 4-5/8-inch overall length, both R7S lampholders and the 3/4-inch drawing body width. Check the remaining body clearance in the fixture before ordering.
Why Buy from Big Frog Supply?
Choose the dimmable R7S 8W 3000K for 900 lumens in a fixture that accepts the 4-5/8-inch overall length. Its drawing shows a 3/4-inch body width, so check housing depth as well as the two end contacts. Compare it with the shorter 5W R7S before selecting by brightness alone.
Manufacturer part number: EA-R7S-8.0W-3080-D
Base: R7S double-ended contacts
Nominal model wattage: 8W
Published power consumption: 8W
Input voltage: 120V AC
Light output: 900 lumens
Color temperature: 3000K
Color rendering index: 80+
Beam distribution: 360°
Material: Ceramic and polycarbonate
Control: Compatible LED dimmer required
Rated life: 36,000 hours under current manufacturer guidance
Manufacturer warranty: Limited lifetime warranty; conditions apply
Location suitability: Damp locations and enclosed fixtures subject to fixture protection and thermal limits; protect from direct water exposure.
