EmeryAllen 4W T10 225mm LED Filament Bulb - 3000K Clear
Brand: EmeryAllen | SKU: EA-T10-4.0W-E26-225-3090-D
Product Overview
The long clear T10 puts the visible filament at the center of an exposed-bulb fixture. Its 3000K light and 385-lumen output suit decorative E26 lighting where the lamp itself is part of the design. Check the full 8-7/8-inch overall length; a familiar medium screw base does not mean it will fit the space for a standard household bulb.
Key Features
- 385 lumens at fixed 3000K.
- E26 medium screw connection for 100–130V AC (120V nominal).
- 4W model class; 3.6W published consumption.
- 360° light distribution.
- Clear glass with visible LED filaments.
Common Uses
- Exposed-bulb pendants designed for long tubular lamps.
- Decorative E26 fixtures with enough vertical and side clearance.
Technical Specifications
- Manufacturer part number: EA-T10-4.0W-E26-225-3090-D
- Base: E26 medium screw
- Nominal model wattage: 4W
- Published power consumption: 3.6W
- Input voltage: 100–130V AC (120V nominal)
- Light output: 385 lumens
- Color temperature: fixed 3000K
- CRI: 94.5
- Beam distribution: 360°
- Material: Glass and aluminum
- Control: Dimmable with compatible LED controls; check the dimmer load range
- Rated life: 15,000 hours
- Manufacturer warranty: 5-year limited warranty; conditions apply
- Damp-location and enclosed-fixture suitability subject to thermal guidance and protection from direct water exposure
- Glass finish: Clear; LED filament design
Dimensions
Overall lamp length: 8-7/8 inches. Maximum lamp diameter: 1-3/16 inches. Compare both with the socket position, shade opening and available lamp space.
Compatibility & Installation Notes
Match the E26 medium screw socket and 100–130V AC (120V nominal) supply. Turn off power and let the old lamp cool before replacement. Compare lumens with the fixture's recommended original lamp; a lower LED wattage does not permit exceeding its recommended light output. Use compatible LED dimming equipment and check its load range. Any fan receiver, photocell, motion sensor or timer must support LED loads. Diode-type hi/lo controls may require the high setting under the manufacturer's guidance. Damp-location use still requires protection from direct water. Follow the fixture's temperature and installation limits.
Frequently Asked Questions
What socket and voltage does it need?
Use a compatible E26 medium screw socket with 100–130V AC (120V nominal). Match the actual socket and supply before ordering.
How much light does it provide?
The published output is 385 lumens at fixed 3000K. Compare lumens and color with the fixture's recommended lamp.
Can it be dimmed?
Yes, with compatible LED dimming equipment. Check the dimmer's load range and any electronic fixture controls before installation.
What dimensions should I check?
Check 8-7/8 inches overall length and 1-3/16 inches maximum diameter against the socket position, shade opening and available lamp space.
Why Buy from Big Frog Supply?
Choose this clear 225mm T10 for a long exposed-filament appearance with 3000K light. Its 385-lumen output favors decorative illumination over high-output general lighting, while the 8-7/8-inch length and 1-3/16-inch diameter give you specific clearance measurements for a pendant or open fixture.
Manufacturer part number: EA-T10-4.0W-E26-225-3090-D
Base: E26 medium screw
Nominal model wattage: 4W
Published power consumption: 3.6W
Input voltage: 100–130V AC (120V nominal)
Light output: 385 lumens
Color temperature: fixed 3000K
CRI: 94.5
Beam distribution: 360°
Material: Glass and aluminum
Control: Dimmable with compatible LED controls; check the dimmer load range
Rated life: 15,000 hours
Manufacturer warranty: 5-year limited warranty; conditions apply
Damp-location and enclosed-fixture suitability subject to thermal guidance and protection from direct water exposure
Glass finish: Clear; LED filament design
