Product Overview
The Houzer NVS-5200 Novus is a 32-inch undermount single-bowl workstation sink with two accessory levels that allow food preparation, rinsing, draining, and cleanup to take place directly over the bowl. Its sliding-platform system supports the included cutting board, roll-up mat, and drying tray at different working heights, helping preserve surrounding counter space while keeping prep mess and water over the sink. The large open basin remains available for cookware and daily cleanup when the accessories are removed or repositioned.
Houzer fabricates the sink from 18-gauge T-304 stainless steel with a satin finish and 10 mm bowl corners. Full-underside insulation and sound-deadening material help reduce water noise, dish clatter, vibration, and condensation. The rear-set standard drain leaves more usable space toward the center and front of the bowl and can help keep plumbing closer to the cabinet wall. Houzer specifies a minimum 36-inch sink base.
The overall sink measures approximately 31-9/16 inches long by 17-13/16 inches wide and 9 inches deep. Houzer’s current product listing describes a 30-by-16-1/4-inch upper inner opening, while the dual-level specification drawing shows an approximately 14-1/4-inch lower basin width between the ledges. The package includes a cutting board, multipurpose roll-up mat, drying tray, bottom grid, basket strainer, mounting hardware, template, and instructions. Confirm accessory clearances, faucet reach, drain routing, reveal style, and support before fabrication.
Key Features:
- Dual-level undermount workstation design
- Large single-bowl configuration
- 18-gauge T-304 stainless steel
- Satin finish with 10 mm bowl corners
- Rear-set 3-1/2-inch drain opening
- Full-underside sound and condensation insulation
- Complete preparation and draining accessory set
- Designed for a 36-inch minimum sink base
Common Uses:
- Main kitchen food-preparation and cleanup station
- Working over the bowl where counter space is limited
- Rinsing produce and draining dishes on sliding accessories
- Large single-bowl workstation renovations
Technical Specifications:
- Manufacturer model / Shopify SKU: NVS-5200
- Series: Novus
- Installation type: Undermount
- Bowl configuration: Large single bowl with dual accessory ledges
- Material: T-304 stainless steel
- Gauge: 18 gauge
- Finish: Satin
- Corner radius: 10 mm
- Overall dimensions: Approximately 31-9/16 inches x 17-13/16 inches x 9 inches
- Upper inner opening: Approximately 30 inches x 16-1/4 inches x 9 inches
- Lower basin width shown in specification drawing: Approximately 14-1/4 inches
- Drain location: Rear
- Drain opening: 3-1/2 inches
- Minimum cabinet size: 36 inches
- Certifications listed by Houzer: ASME 100.19.3-2000, UPC, and CSA
What's Included:
- Cutting board
- Multipurpose roll-up mat
- Drying tray
- Stainless steel bottom grid
- Basket strainer
- Mounting hardware, cutout template, and installation instructions
Compatibility and Installation Notes:
Use the actual sink and current Houzer template before cutting the countertop. Confirm the selected reveal, cabinet support, faucet reach across both accessory levels, rear-drain plumbing, disposal clearance, and storage below the sink. Replacement accessories must be identified for NVS-5200 because workstation ledge dimensions are model-specific.
FAQ
Is NVS-5200 a double-bowl sink?
No. It is one large single bowl with two sliding accessory levels.
What accessories are included?
The package includes a cutting board, roll-up mat, drying tray, bottom grid, basket strainer, mounting hardware, template, and instructions.
What cabinet size is required?
Houzer specifies a minimum 36-inch sink base.
Does NVS-5200 have zero-radius corners?
No. Houzer’s current specification identifies 10 mm bowl corners.
Why Buy the Houzer NVS-5200 From Big Frog Supply?
Big Frog Supply identifies the exact dual-level workstation configuration, full included accessory set, 10 mm corner specification, upper and lower bowl measurements, rear drain, cabinet requirement, and manufacturer documents so customers can plan the sink, faucet, and countertop opening accurately.
