Product Overview
The Hydro-Rain PVCL-401-007 is a 3/4-inch PVC-Lock tee for creating a three-way branch in compatible PVC irrigation piping. Its push-fit connections grip and seal the pipe without primer or solvent cement at the fitting joint and can be released with the compatible PVC-Lock release tool.
Key Features
- 3/4 in. PVC-Lock tee
- Push-fit installation
- Releasable and reusable with a compatible PVC-Lock release tool
- UV-resistant ABS body
- 316 stainless steel retaining teeth
- Buna-N sealing O-ring
- Compatible with Schedule 40, Schedule 80, and Class PVC pipe
Common Uses
- Branching PVC irrigation lateral lines
- Residential and commercial sprinkler installations
- Repairs or system modifications where a push-fit connection is preferred
Technical Specifications
-
Model: PVCL-401-007
-
Fitting Type: Tee
-
Size: 3/4 in.
-
Operating Pressure Range: 0-150 PSI
-
Listed Operating Pressure: 80 PSI
-
Burst Pressure: 600 PSI
-
Body Material: UV-resistant ABS
-
Retaining Teeth: 316 stainless steel
-
Seal Material: Buna-N
-
Temperature Rating: 139°F
-
Approximate Dimensions: 3.45 x 3.25 x 1.38 in.
Compatibility & Installation Notes
Use with compatible Schedule 40, Schedule 80, or Class PVC pipe. Cut the pipe square, remove burrs, bevel the pipe end as directed by Hydro-Rain, and insert the pipe fully into the fitting. Use a compatible PVC-Lock release tool when disassembling the connection. The family fitting sheet is stored with this product in the product resources.
Frequently Asked Questions
Does this fitting require PVC primer and glue?
No primer or solvent cement is used at the PVC-Lock push-fit joint.
Can the tee be removed and reused?
Yes, when released with the compatible PVC-Lock release tool and the fitting and pipe remain in serviceable condition.
Why Buy Hydro-Rain PVCL-401-007 from Big Frog Supply?
The PVCL-401-007 provides a reusable 3/4-inch push-fit tee for branching compatible PVC irrigation piping without building a conventional glued tee joint.
