Brand: Intermatic | Manufacturer Part Number: EI200W | Big Frog Supply SKU: EI200W
Product Overview
The Intermatic EI200W is a white electronic in-wall countdown timer that provides four preset operating periods without requiring a programming sequence. Pressing the control selects 5, 10, 15, or 30 minutes, after which the timer turns the connected load off automatically. A HOLD mode allows continuous operation when timed shutoff is not appropriate. Silent electronic operation makes this model useful where the ticking sound of a mechanical countdown timer would be distracting.
The EI200W replaces a compatible single-pole switch and works with approved incandescent, fluorescent, CFL, LED, ventilation, motor, and resistive-heater loads within its ratings. A neutral connection is required. The timer uses a decorator-style single-gang format, but the wall plate is not included. It should not be used for sunlamps, saunas, or loads whose unattended operation could create a personal-safety risk.
Key Features
- Preset 5-, 10-, 15-, and 30-minute countdown times
- HOLD mode for continuous ON operation
- Silent digital/electronic operation
- Single-pole SPST-NO switching
- Compatible with incandescent, fluorescent, CFL, and LED lighting
- Neutral connection required
- White decorator-style control; wall plate not included
Common Uses
- Bathroom and utility-room ventilation fans
- Indoor lighting control
- Approved resistive heaters
- Other loads that benefit from automatic shutoff
Technical Specifications
-
Input voltage: 120 VAC, 60 Hz
-
Operation: Electronic countdown
-
Preset times: 5, 10, 15, and 30 minutes
-
Switch type: SPST-NO
-
Hold mode: Yes
-
Neutral required: Yes
-
Resistive heater: 15 A / 1800 W
-
Motor load: 1/4 HP
-
Electronic ballast/LED: 4 A / 500 VA
-
Magnetic ballast: 8 A / 1000 VA
-
Tungsten: 1000 W
Dimensions
-
Height: 4.125 inches
-
Width: 1.688 inches
-
Depth: 1.438 inches
Installation Notes
Disconnect power before installation and confirm that a neutral conductor is available in the wall box. Verify the connected load against the timer ratings and use a compatible decorator wall plate. Electrical installation should be completed by a qualified person following Intermatic instructions.
Frequently Asked Questions
Does the EI200W need to be programmed?
No. Select one of the four preset countdown times with the control button.
Can the load remain on continuously?
Yes. The EI200W includes a HOLD mode.
Is a neutral wire required?
Yes. A neutral connection is required.
Why Buy This Product from Big Frog Supply?
The EI200W is a practical choice when a quiet, preset countdown timer is preferable to a spring-wound model. Big Frog Supply clearly identifies the HOLD function, neutral requirement, preset times, load ratings, and wall-plate exclusion so the exact configuration is understood before purchase.
Color White
Input Voltage Range(s) 120 VAC, 60 Hz
Mechanism Type Digital/Electrical
Operation Mode Countdown
Wiring Configurations Single
Hold Mode Included Yes
Wall Plate Configurations Single-Gang
Countdown Time 30 min
Neutral Connection Required Yes
Time Presets 5 min, 10 min, 15 min, 30 min
Warranty Period 1-Year limited
Application Compatibilities CFL, Fluorescent, Incandescent, LED
Ballast Fluorescent 8 A, 1000 VA
CAProp65Message
Please see the Warning @ www.P65Warnings.ca.gov
Country Of Origin China
Electronic Ballast LED 4 A, 500 VA
Motor Load Ratings (Ranges) 1/4 HP
Resistive Heater 15 A, 1800 W
RoHS Certification Yes
Tungsten (Incandescent) Range(s) 1000 W
Tungsten Incandescent 1000 W
Operating Temperature Max (°C) 40
Operating Temperature Max (°F) 104
Operating Temperature Min (°C) 0
Operating Temperature Min (°F) 32
