Brand: Jones Stephens SKU: D60130
Product Overview
The Jones Stephens D60130 is a 3-inch PVC inside-pipe-fit drain with a 3-1/2-inch round nickel-bronze strainer. It is designed for post-pour adjustment applications where the drain can be prepared and solvent-welded into the inside of compatible 3-inch pipe to establish the finished drain elevation without chipping or chiseling surrounding material.
The high-impact PVC drain body fits within the pipe rather than around the outside, which can be useful when access, finished height, or existing concrete conditions make an outside-hub drain impractical. The nickel-bronze round strainer covers the drain opening and provides a durable finished surface. The cover diameter is intentionally larger than the nominal pipe opening to provide full coverage at the installation point.
The D60130 has a listed maximum working temperature of 140°F and a working-pressure rating of 14.2 PSI. It is a drainage component rather than a pressurized-water valve, and the suitability of those ratings must be evaluated for the actual application. Use the PVC primer and solvent cement approved for the pipe and fitting materials, follow required cure times, and comply with local plumbing and drainage codes.
Key Features
- Fits inside compatible 3-inch PVC pipe
- Designed for post-pour drain-height adjustment
- High-impact PVC body
- 3-1/2-inch round nickel-bronze strainer
- Helps avoid chipping or chiseling for final height adjustment
- 140°F maximum working temperature
- 14.2 PSI working-pressure rating
Common Uses
- Post-pour floor-drain installations
- Setting a finished drain height inside existing 3-inch pipe
- Concrete or finished-floor applications where outside access is limited
- Replacing a compatible inside-pipe-fit drain assembly
Compatibility and Installation Notes
Confirm the pipe is compatible 3-inch PVC and that its inside condition allows proper solvent-weld preparation. Dry-fit and establish the finished elevation before applying primer and cement. Clean and prepare both bonding surfaces, follow the adhesive manufacturer's instructions, and allow the full cure time before exposing the drain to service. Do not substitute this part where a code-required clamping drain, trap primer connection, or other specialized drain is specified.
Frequently Asked Questions
Does the drain fit over the outside of the pipe?
No. D60130 is designed to fit inside compatible 3-inch pipe.
Is the strainer included?
Yes. It includes a 3-1/2-inch round nickel-bronze strainer.
Why use an inside-pipe-fit drain?
It can allow final height adjustment after the pour and may reduce the need to chip or chisel around the existing pipe.
Why Buy the Jones Stephens D60130 from Big Frog Supply?
This listing clearly distinguishes the inside-pipe-fit design from conventional hub drains and identifies the included nickel-bronze strainer, temperature rating, and installation purpose. Big Frog Supply also carries compatible plumbing tools, sealants, and drain components for completing code-compliant repair and installation work.
