Brand: K-Rain SKU: 2114
Product Overview
The K-Rain 2114 is a mechanical single-station irrigation controller with a built-in transformer. It accepts 110 VAC input and provides a verified 24 VAC, 20 VA output for one compatible low-voltage irrigation device. This configuration is intended for installations that need simple mechanical scheduling without directly switching a line-voltage pump motor.
A 24-hour dial supports multiple start settings, while retained scheduling pins provide a repeating 14-day program. The mechanical layout makes watering times visible at the controller and avoids menu-based programming. Its rain-tight enclosure supports approved installations when mounted, wired, and protected according to K-Rain instructions and local electrical requirements.
The output rating is 20 VA. Confirm the connected solenoid, relay, or other approved 24 VAC load does not exceed the controller's transformer capacity, including inrush requirements. The 2114 should not be confused with the 2110 or 2112, which switch 110 VAC line-voltage loads, or with higher-capacity multi-station controllers. The product title may reflect older catalog wording, but the customer-facing specifications on this page use the current verified 24 VAC, 20 VA rating. Installation should be completed by a qualified professional with power disconnected.
Key Features
- 110 VAC input
- Built-in 24 VAC, 20 VA transformer output
- Single-station mechanical scheduling
- 24-hour dial with multiple start settings
- Repeating 14-day retained-pin schedule
- Rain-tight enclosure for approved installations
- Designed for a compatible low-voltage irrigation load
Common Uses
- Operating one compatible 24 VAC irrigation valve
- Controlling a compatible low-voltage pump-start relay
- Replacing an exact K-Rain 2114 controller
- Simple single-zone mechanical irrigation scheduling
Compatibility and Installation Notes
- Verified output is 24 VAC at 20 VA.
- Confirm the connected device's operating and inrush demand is within the transformer rating.
- This controller does not directly switch a 1 HP or 2 HP line-voltage pump.
- Use a compatible relay or starter when the irrigation design requires pump control.
- Follow current K-Rain wiring instructions and applicable electrical codes.
Frequently Asked Questions
What is the verified output rating?
The K-Rain 2114 provides 24 VAC output with a 20 VA transformer rating.
Can it power a 110V pump directly?
No. Its controller output is low voltage. A properly rated separate relay or starter is required for compatible pump control.
How many stations does it operate?
It is a single-station controller for one compatible 24 VAC load.
Why Buy This K-Rain 2114 from Big Frog Supply?
Big Frog Supply highlights the verified 20 VA transformer rating and the difference between the 2114 low-voltage model and the line-voltage 2110/2112 timers, reducing the risk of choosing a controller with the wrong output type.
Product Type Transformer-output mechanical single-station controller
Manufacturer Part Number 2114
Series K-Rain 2100 Series
Input Power 110 VAC, 60 Hz
Output Power 24 VAC, 20 VA
Transformer Built in
Programming 24-hour dial with multiple starts; 14-day retained-pin schedule
Compatible Load One approved 24 VAC irrigation device within 20 VA capacity
Direct Line-Voltage Pump Output No
Enclosure Rain-tight
