King Innovation 90220 DryConn Aqua Direct-Bury Tracer Lug – 5-Bag
Brand: King Innovation | SKU: 90220
Product Overview
The 90220 DryConn Aqua lug makes a low-voltage utility tracer or cathodic tap without cutting the main conductor. Its prefilled housing closes around the secured solid-wire connection, with a three-point latch for direct-bury protection. The bag contains five lugs; choose it for #14–#10 solid copper or steel-core tracer wire on circuits up to 50 V.
Key Features
- Five connector systems per bag
- Side A accepts an uncut main or tap conductor
- Prefilled non-hardening dielectric sealant
- High-impact polypropylene housing with three-point lid
Common Uses
- Low-voltage utility tracer-wire taps
- Approved cathodic or direct-bury solid-wire connections
Technical Specifications
- Maximum 50 V
- Solid conductors only: #14–#10 copper or #14–#10 steel-core tracer wire
- Tin-plated aluminum lug and zinc-plated steel screws
- Sealant temperature range -45°F to 400°F
Dimensions
Connector size: 1.138 x 1.617 in.; overall drawing includes 1.929 in. dimension.
Compatibility & Installation Notes
Turn off power. Strip each connection area 5/8 in.; use side A for an uncut main or tap. Follow King Innovation’s different set-screw turn instructions for solid copper versus steel-core tracer wire, remove the sealant cover, and latch the housing. Do not reuse.
Frequently Asked Questions
Can I use stranded copper wire?
No. King specifies solid conductor only for the 90220. Compare the 90750 Lug Plus for its separately listed stranded-copper range.
Must the main tracer line be cut?
No. The housing and side A support an uncut main or tap conductor when installed as directed.
Why Buy From Big Frog Supply
Big Frog Supply identifies the 90220 tracer-wire range and package count so you can choose the correct connection for the installation.
Model 90220 DryConn Direct Bury Lug Aqua
Bag of 5; maximum 50 V
Solid conductor only: #14–#10 copper or #14–#10 steel-core tracer wire
Tin-plated aluminum lug, zinc-plated screws, polypropylene housing
Non-hardening dielectric sealant, -45°F to 400°F
Connector: 1.138 x 1.617 in.; drawing C 1.929 in.
Uncut main or tap can enter side A; do not reuse
