King Innovation 98230 DryConn 316 IR+ Irrigation Connectors – 30-Bag
Brand: King Innovation | SKU: 98230
Product Overview
The DryConn 316 IR+ is an insulation-displacement connector for compatible copper irrigation wiring. Insert one insulated conductor in each port and press the cap fully into the housing; no wire stripping is needed. The 30-count bag suits repeated field splices, with manufacturer approval for low-voltage wet, damp, and direct-bury use at 30 V.
Key Features
- 30 connectors per bag
- Insulation-displacement design; no stripping required
- One conductor per port, with two- or three-wire configurations
- UV- and impact-resistant polycarbonate housing
Common Uses
- Low-voltage irrigation wiring splices
- Manufacturer-approved 30 V wet, damp, and direct-bury connections
Technical Specifications
- Copper/copper solid or stranded; overall #22–#14 AWG range
- Not for three #14 AWG conductors
- 600 V maximum building wire; 1000 V signs or luminaires; 30 V approval for wet/damp/direct-bury applications
- 105°C (221°F) connector temperature rating
Dimensions
Connector: 0.99 x 0.95 in. (25.1 x 24.1 mm).
Compatibility & Installation Notes
Turn off power. Seat one conductor fully in each port; place a stranded conductor in the center port when mixing solid and stranded. Press the cap flush or slightly below the housing edge with a hand tool, wipe excess sealant, and do not reuse. Verify the exact wire combination and local code.
Frequently Asked Questions
Do I strip the insulation first?
No. The 316 IR+ uses insulation displacement; insert insulated conductors as King Innovation directs.
Can three #14 AWG wires be used?
No. King Innovation expressly excludes three #14 AWG conductors.
Is the direct-bury approval 600 V?
No. King specifies low-voltage 30 V wet, damp, and direct-bury applications; the separate 600 V building-wire figure does not expand that approval.
Why Buy From Big Frog Supply
Big Frog Supply identifies the exact 98230 connector count and wiring limits so you can compare it with the installation or storage needs before ordering.
Model: 98230 DryConn 316 IR+
Selling unit: bag of 30
Insulation-displacement connector; one conductor per port
Copper/copper solid or stranded, overall #22–#14 AWG
Not for three #14 AWG conductors
600 V maximum building wire; 1000 V signs or luminaires
Manufacturer-approved wet, damp, direct burial at low voltage 30 V
105°C (221°F); UV- and impact-resistant polycarbonate housing
Do not reuse
