Brand: Hunter Industries SKU: PGP-12-CV
Product Overview
The Hunter PGP-12-CV is a 12-inch pop-up PGP Ultra gear-drive rotor with an adjustable 50° to 360° arc and a factory-installed check valve. Its tall riser helps the water stream clear shrubs, groundcover, and higher turf, while the check valve reduces low-head drainage after the irrigation zone shuts off.
PGP Ultra features such as automatic arc return and a non-strippable drive help the rotor recover if the turret is turned beyond its intended setting. Through-the-top arc and radius adjustment make field setup accessible after installation. The package includes eight standard nozzles and four low-angle nozzles, allowing the flow, radius, and trajectory to be matched to the irrigation design.
Key Features
- 12-inch pop-up PGP Ultra rotor
- Adjustable 50° to 360° arc
- Factory-installed check valve
- Automatic arc return and non-strippable drive
- Through-the-top arc and radius adjustment
- Eight standard and four low-angle nozzles included
- 3/4-inch female NPT inlet
- Water-lubricated gear drive
Common Uses
- Shrub beds and taller landscape plantings
- Large turf areas requiring 12 inches of pop-up clearance
- Sloped zones with low-head drainage concerns
- Residential, commercial, and institutional irrigation systems
Technical Specifications
-
Pop-Up Height: 12 inches
-
Overall Height: Approximately 17 inches
-
Exposed Diameter: Approximately 1-3/4 inches
-
Inlet: 3/4-inch female NPT
-
Arc: 50° to 360°
-
Radius: Approximately 17 to 47 feet, depending on nozzle and pressure
-
Flow: Approximately 0.36 to 14.8 GPM, depending on nozzle and pressure
-
Recommended Pressure: 25 to 70 PSI
-
Operating Pressure: 20 to 100 PSI
-
Nozzle Trajectory: 25° standard or 13° low angle
Compatibility and Installation Notes
Select the nozzle from the required radius, flow, trajectory, head spacing, and available pressure. Connect to a compatible 3/4-inch swing joint or threaded fitting and install level with finished grade. Flush the lateral line before inserting the final nozzle and adjust the arc and radius while the rotor is operating.
Frequently Asked Questions
Does the PGP-12-CV include a check valve?
Yes. The CV designation identifies the factory-installed check-valve configuration.
Can it water a full circle?
Yes. The adjustable arc ranges from 50 degrees through 360 degrees.
Are nozzles included?
Yes. Hunter identifies eight standard and four low-angle nozzles as included with this model.
Why Buy the Hunter PGP-12-CV from Big Frog Supply?
This model combines a tall 12-inch riser, PGP Ultra drive protection, multiple nozzle choices, and a factory check valve in one rotor. Big Frog Supply provides the performance ranges and included-nozzle details needed to compare it with shorter PGP models before ordering.
Product type: Adjustable gear-drive rotor with check valve
Arc range: 50° to 360°
Radius range: Approximately 17 to 47 ft, varies by nozzle and pressure
Flow range: Approximately 0.36 to 14.8 GPM, varies by nozzle and pressure
Recommended pressure: 25 to 70 PSI
Operating pressure: 20 to 100 PSI
Included nozzles: 8 standard and 4 low-angle
Nozzle trajectory: 25° standard; 13° low angle
Check valve: Factory installed
