Brand: Hunter Industries SKU: PROS12PRS30
Product Overview
The Hunter PROS-12-PRS30 is a 12-inch pop-up sprinkler body with an in-stem regulator that maintains approximately 30 PSI at the nozzle. The tall riser is designed to clear shrubs, groundcover, and higher plant material while supporting compatible female-threaded fixed, adjustable, and specialty spray nozzles. This no-side-inlet configuration is supplied as a sprinkler body with a flush plug; the watering nozzle is sold separately.
The brown identification cap distinguishes the PRS30 model. A co-molded wiper seal helps limit flow-by and debris entry, while the heavy-duty spring retracts the long riser after the zone shuts off. The directional flush plug supports cleaner line flushing before nozzle installation.
Key Features
- 12-inch pop-up sprinkler body
- Pressure regulated to approximately 30 PSI
- Operational inlet-pressure range of 15 to 100 PSI
- Compatible with industry-standard female-threaded spray nozzles
- 1/2-inch female-threaded bottom inlet
- No-side-inlet configuration
- Brown PRS30 identification cap
- Co-molded wiper seal and heavy-duty spring
- No watering nozzle or factory check valve identified
Common Uses
- Shrub beds and taller plantings
- Residential and commercial spray zones
- Locations requiring 12 inches of pop-up clearance
- Conventional spray-nozzle systems requiring 30 PSI regulation
Compatibility and Installation Notes
- Select a compatible female-threaded spray nozzle separately.
- Connect to a compatible 1/2-inch threaded swing joint or fitting.
- Install vertically with the cap level with finished grade and adequate riser clearance.
- The base model number does not identify a factory-installed check valve.
- Use the separate CV configuration when low-head drainage control is required.
Frequently Asked Questions
Does PROS12PRS30 include a nozzle?
No. It is the pressure-regulated sprinkler body. The compatible watering nozzle is selected separately.
Does this model include a check valve?
No factory check valve is identified in the base PROS-12-PRS30 model number. Choose PROS-12-PRS30-CV for that feature.
Does it have a side inlet?
No. This is the standard no-side-inlet PRS30 configuration.
Why Buy from Big Frog Supply?
Big Frog Supply carries Hunter 12-inch Pro-Spray bodies, PRS30 and PRS40 models, spray nozzles, check valves, swing joints, and irrigation repair parts.
Product Type Pressure-regulated pop-up sprinkler body
Manufacturer Model PROS-12-PRS30
Store SKU PROS12PRS30
Pop-Up Height 12"
Regulated Nozzle Pressure 30 PSI
Factory Check Valve Not included
Side Inlet No
Operational Inlet-Pressure Range 15–100 PSI
Identification Cap Brown
Nozzle Connection Industry-standard female-threaded nozzle
Inlet 1/2" female threaded
Included Nozzle No; directional flush plug included
