Rain Bird - Drainage Pop Up Relief Valve with 4 Inch PVC Elbow and Hub Fitting Adapter

Spec Sheet

A pop-up water relief valve (also commonly known as a pop-up drainage emitter) that is normally closed except when there is a build up of hydrostatic pressure. As the drainage pipes fill and build up slight pressure, the cover rises to allow the excess water to escape. Once the water is discharged the pressure drops and a stainless steel spring automatically retracts the cover to its closed flush position. The flush design of the product ensures that it blends well into the surrounding area. It is manufactured from a structurally foamed High Density Polyethylene (HDPE) with a UV inhibitor to reduce sun damage. Typical application is at the discharge end of the drainage pipe. Can be installed in either a vertical or horizontal position.

• Pop-up valve body manufactured from structurally foamed High-Density Polyethylene (HDPE)
• Elbow manufactured from PVC, includes 1/4 inch drain hole to eliminate standing water
• Adapter manufactured from High Impact Polystyrene (HIPS)
• UV stabilized to protect from sun degradation
• Spring-loaded cover rises ½" to discharge excess water in system
• Spring automatically retracts cover to closed position after excess water is discharged
• Can be used in both vertical and horizontal position
• Stainless steel spring to prevent rusting
• Made in the USA

Drainage Pop-Up Valve with 4" PVC Elbow and Adapter (dpafhA34)

Connect to
• 3" or 4" Corrugated Pipe
• 3" or 4" Triple Wall Pipe
• 3" or 4" S & D Pipe (ASTM D2729)