Skip to content
Enjoy fast and free shipping on all orders over $89! Contact us (855) 424-4376
Enjoy fast and free shipping on all orders over $89! Contact us (855) 424-4376

Rain Bird IVM100PGA 1-Inch NPT Valve with IVM-SOL

Brand: Rain Bird | SKU: IVM100PGA

Product Overview

Choose IVM100PGA for a 1-inch commercial valve location on a compatible ESP-LXIVM two-wire system. The preinstalled IVM-SOL provides the valve’s smart-control connection, while globe and angle arrangements give the installer piping options. Check the 1-inch pressure-loss data and the water-temperature pressure limit before selecting the valve.

Key Features

  • Factory-installed IVM-SOL for compatible ESP-LXIVM two-wire control.
  • Globe or angle configuration using the appropriate inlet arrangement.
  • PVC body and glass-filled nylon bonnet.
  • Filtered pilot flow and non-rising manual flow-control handle.
  • Internal manual bleed for local operation.

Common Uses

  • Commercial IVM irrigation systems using 1-inch valve connections.
  • Globe or angle piping layouts checked against available pressure and flow.

Technical Specifications

  • Model: IVM100PGA; quantity: one NPT valve with IVM-SOL.
  • Connection: 1-inch female NPT.
  • Operating pressure envelope: 15–150 psi, subject to water-temperature derating.
  • Continuous-pressure limits: 150 psi at 73°F; 132 psi at 80°F; 112 psi at 90°F; 93 psi at 100°F; 75 psi at 110°F.
  • Maximum water temperature: 110°F; maximum ambient temperature: 125°F.
  • Family flow envelope: 2–150 GPM across sizes; individual sizing uses the correct model and configuration column.
  • 1-inch chart provides data from 2–40 GPM; at 20 GPM, loss is 6.0 psi in globe configuration or 5.6 psi in angle configuration.
  • Pressure-loss examples assume the flow control is fully open.
  • IVM-SOL rating: 26.5 Vrms, 50/60 Hz; operating voltage range: 15.6–29.2 Vrms.
  • Inrush current: less than 40 mA peak; quiescent current: less than 0.4 mA average.

Dimensions

Valve assembly: 7-1/4 inches high x 5-1/2 inches long x 3-1/4 inches wide. Allow room for bonnet and solenoid servicing; optional PRS-D adds 2 inches to height.

Compatibility & Installation Notes

Choose globe or angle configuration using the manufacturer’s inlet-plug instructions, and size from the matching pressure-loss column. Connect the IVM-SOL to the compatible IVM two-wire path with correct polarity, approved waterproof splices and grounding; record the device address for programming. It is not a conventional 24 VAC station-output valve. Flush before installation and use upstream filtration below 5 GPM. Check the continuous-pressure rating at the actual water temperature. Optional PRS-D regulation is sold separately, adds 2 inches to height and requires at least 5 GPM within the size’s hydraulic design.

Frequently Asked Questions

Can I use a conventional 24 VAC station output?

No. The preinstalled IVM-SOL is designed for a compatible ESP-LXIVM two-wire system, not a conventional station-output connection.

Can I combine the highest pressure and temperature ratings?

No. Continuous-pressure capability falls as water temperature rises: the manufacturer lists 150 psi at 73°F and 75 psi at 110°F, with intermediate limits in its rating table.

Does globe versus angle installation change pressure loss?

Yes. Use the correct size and configuration column in the manufacturer’s pressure-loss chart.

Is the PRS-D pressure regulator included?

No. The compatible PRS-D module is an optional accessory sold separately. It changes height and flow requirements.

Why Buy from Big Frog Supply?

IVM100PGA pairs a 1-inch NPT connection with a preinstalled smart solenoid and globe/angle installation options. Its 7-1/4-inch height and 5-1/2 x 3-1/4-inch footprint help with box planning, while the separate globe and angle loss figures support choosing the piping arrangement.

Model: IVM100PGA; quantity: one NPT valve with IVM-SOL.
Connection: 1-inch female NPT.
Operating pressure envelope: 15–150 psi, subject to water-temperature derating.
Continuous-pressure limits: 150 psi at 73°F; 132 psi at 80°F; 112 psi at 90°F; 93 psi at 100°F; 75 psi at 110°F.
Maximum water temperature: 110°F; maximum ambient temperature: 125°F.
Family flow envelope: 2–150 GPM across sizes; individual sizing uses the correct model and configuration column.
1-inch chart provides data from 2–40 GPM; at 20 GPM, loss is 6.0 psi in globe configuration or 5.6 psi in angle configuration.
Pressure-loss examples assume the flow control is fully open.
IVM-SOL rating: 26.5 Vrms, 50/60 Hz; operating voltage range: 15.6–29.2 Vrms.
Inrush current: less than 40 mA peak; quiescent current: less than 0.4 mA average.

Valve assembly: 7-1/4 inches high x 5-1/2 inches long x 3-1/4 inches wide. Allow room for bonnet and solenoid servicing; optional PRS-D adds 2 inches to height.

No related articles found.

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare