Rain Bird WR2RFC-48 Wireless Rain/Freeze Sensor Kit
Brand: Rain Bird | SKU: WR2RFC-48
Product Overview
The Rain Bird WR2RFC-48 pairs a wireless outdoor rain/freeze sensor with a controller interface for compatible 24 VAC irrigation systems. Its WR2-48 hold mode prevents watering for 48 hours following measured rainfall. Adjustable rain and temperature thresholds let you match shutoff behavior to the site, while the interface shows sensor status and signal strength.
Key Features
- Sensor and controller-interface combo with outdoor mounting bracket.
- 48-hour irrigation-hold mode following measured rainfall.
- Adjustable rainfall threshold from 1/8 to 1/2 inch.
- Freeze thresholds of 33°F, 37°F or 41°F.
- Up to 700-foot line-of-sight wireless range.
- Signal-strength indicators help choose a mounting location.
Common Uses
Adding weather-based interruption to a compatible residential or commercial 24 VAC irrigation controller, particularly where a 48-hour post-rain hold is desired. Check local watering requirements and the selected operating mode for the installation.
Technical Specifications
| Merchant model | WR2RFC-48; Rain Bird WR2-48 rain/freeze combo |
|---|---|
| System compatibility | Compatible 24 VAC irrigation controllers |
| Radio version | North America; 916 MHz |
| Rainfall threshold | Six settings from 1/8 to 1/2 inch |
| Freeze threshold | 33°F, 37°F or 41°F |
| 48-hour mode | Prevents irrigation for 48 hours following measured rainfall |
| Other modes | Programmed irrigation; 72-hour sensor override |
| Override effect | Selecting sensor override cancels an active 48-hour hold |
| Maximum wireless range | 700 feet line of sight; verify signal at the site |
| Interface lead | 30-inch #22 gauge UV-resistant wire |
| Electrical capacity | Up to six 24 VAC, 7 VA solenoids plus a master valve or pump-start circuit; 53 VA total maximum |
| Sensor battery | Replaceable CR2032 battery |
Dimensions
Controller interface: 3.1 inches wide × 6.8 inches long × 1.7 inches deep. Sensor length: 5.8 inches. Attachment bracket length: 4.6 inches. These are component measurements, not shipping-carton dimensions.
Compatibility & Installation Notes
Check the irrigation controller model and wiring arrangement before ordering. Rain Bird excludes ESP-SMT, ESP-SMTe, SST600s and SST1200s smart controllers. This is a 24 VAC interface system; it is not a direct battery-controller sensor substitute. Disconnect controller power before wiring and follow the WR2-48 manual for the controller’s sensor terminals or common-wire arrangement. Pair the sensor and interface, test signal strength at the proposed location, and mount the sensor where rainfall reaches it without sprinkler spray or roof runoff. The bracket mounts to a gutter or vertical surface. Select the intended mode: the 48-hour hold is a distinct setting, and a 72-hour sensor override cancels that hold. A wireless-range rating is a line-of-sight maximum, not a promise through buildings or terrain.
Frequently Asked Questions
Is this the sensor alone?
No. WR2RFC-48 is the rain/freeze sensor and controller-interface combo, with a sensor mounting bracket.
How does the 48-hour mode work?
It prevents irrigation for 48 hours following measured rainfall. Selecting the 72-hour sensor override cancels an active 48-hour hold.
Will it work with every Rain Bird controller?
No. Check for compatible 24 VAC wiring. Rain Bird lists ESP-SMT, ESP-SMTe, SST600s and SST1200s as incompatible.
What freeze settings can I choose?
The rain/freeze sensor offers 33°F, 37°F and 41°F temperature set points.
Why Buy from Big Frog Supply?
Choose WR2RFC-48 from Big Frog Supply when you need a sensor/interface combo with a specific 48-hour post-rain hold rather than the standard WR2’s timed-suspend mode. Its selectable 33°F, 37°F and 41°F freeze thresholds add a second reason to interrupt watering. Confirm the 24 VAC controller fit and outdoor signal path before choosing this North American kit.
