Rain Bird XS360TS025 360° True Spray Micro-Spray — 1/4-Inch Barb
Brand: Rain Bird | SKU: XS360TS025
Product Overview
The Rain Bird XS360TS025 applies a full-circle fan spray for ground cover, flower beds and container plantings. Turn the outer cap to adjust flow and wetted coverage. This version uses a 1/4-inch barb inlet; choose the connection to match the riser or tubing in the watering layout.
Key Features
- Full-circle fan spray pattern.
- Outer cap adjusts flow and wetted radius.
- 1/4-inch barb inlet.
- Cap fully unscrews from the base for cleaning.
- Operates at 15–30 psi.
Common Uses
- Watering ground cover, mass plantings and annual flower beds.
- Full-circle watering around containers or a central point in a planting bed.
Technical Specifications
- Model: XS360TS025; manufacturer part X66036.
- Pattern: 360° full-circle fan spray.
- Inlet: 1/4-inch barb.
- Operating pressure: 15–30 psi.
- Adjustable flow: 0–24.5 GPH at 30 psi; 0–17 GPH at 15 psi.
- Published wetting radius: 0–6.7 feet; actual coverage varies with pressure and cap setting.
- Adjustment and cleaning: turn the outer cap to adjust; unscrew it completely to clean.
- Spray head only; riser or tubing, stake, manifold, filter and regulator are separate components.
Dimensions
The 1/4-inch designation identifies the nominal barb connection, not the head’s overall dimensions. The 6.7-foot figure is wetting radius. Leave clearance to turn and remove the cap, and position the outlet above soil, mulch and nearby obstructions.
Compatibility & Installation Notes
Seat the barb inlet securely in compatible 1/4-inch distribution tubing and support the head with a suitable stake where needed. The manufacturer’s installation detail shows barb-inlet True Spray heads supplied through 1/4-inch distribution tubing from a separate six-outlet manifold and pressure regulator, with supporting stakes. The drawing is an installation example; illustrated supply and mounting parts are separate. Flush the supply, provide appropriate upstream filtration and regulate pressure to 15–30 psi. Turn the cap to set flow and coverage, then inspect the wetted area for runoff and missed areas. Flow changes with pressure and cap setting; this is not a fixed-flow pressure-compensating emitter. Secure tubing connections, because a dislodged head can release unregulated water. Remove the cap from the base when cleaning is needed.
Frequently Asked Questions
Is the flow fixed at 24.5 GPH?
No. Flow is adjustable up to 24.5 GPH at 30 psi or 17 GPH at 15 psi, depending on cap setting.
What is the wetting pattern?
It produces a full-circle fan spray with a published adjustable radius of 0–6.7 feet. Actual coverage depends on pressure, setting and site conditions.
Which inlet does this version use?
XS360TS025 has a 1/4-inch barb inlet. The 10-32 threaded and spike-mounted versions are separate models.
Why Buy from Big Frog Supply?
Choose XS360TS025 when the watering point is fed by compatible 1/4-inch distribution tubing and needs a full-circle fan pattern. Cap adjustment tunes flow and coverage up to the listed 6.7-foot radius. Support the head separately and check zone capacity for up to 24.5 GPH at 30 psi; the stake-mounted and 10-32 threaded versions are separate choices.
Model: XS360TS025
Manufacturer part: X66036
360° full-circle fan spray
Inlet: 1/4-inch barb
Operating pressure: 15–30 psi
Adjustable flow: 0–24.5 GPH at 30 psi; 0–17 GPH at 15 psi
Published wetting radius: 0–6.7 feet
Flow and coverage vary with pressure and cap setting
Outer cap adjusts flow and radius; fully removes for cleaning
Not a fixed-flow pressure-compensating emitter
Spray head only; mounting and supply components separate
