DIG

The innovative PCA-CV pressure compensating drip emitter with a check valve has a water-saving feature which eliminates water drainage when the sys...

Use to plug holes in main line or to stop flow out of the end of 1/4 distribution tubing.

Air Vent Cap Replacement Part for: RBC 8000 - Single-Station Battery Operated Timer mounted on a 3/4" anti-siphon valve ECO1ASV.075 - Ambient-lig...

Anti-siphon diaphragm assembly Replacement Part for: RBC 8000 - Single-Station Battery Operated Timer mounted on a 3/4" anti-siphon valve ECO1ASV...

Contains antioxidants to protect the drip tubing from thermal degradation; minimum of 2% concentrated carbon black resin added Polyethylene drip t...

The Button Drip Emitters utilize a unique labyrinth flow path design, producing a turbulent flow for consistent operation with less chance of clogg...

Features High-impact plastic UV-resistant Stake with flow adjustment available with 10/32 thread Flow rate on stake is adjustable to off For secur...

Features High-impact plastic UV-resistant Stake with flow adjustment available with 10/32 thread Flow rate on stake is adjustable to off For secur...

The Button Drip Emitters utilize a unique labyrinth flow path design, producing a turbulent flow for consistent operation with less chance of clogg...

DIG’s range of 1/4, 1/2 and 3/4 barbed and threaded shut-off valves are used for manual control of individual drip-line laterals, drip tubing or mi...

Air Vent Cap & Poppet assembly Replacement Part for: A4 - Four-Outlet Drip Irrigation Manifolds A4-12 - Four-Outlet Drip Irrigation Manifolds

The 1/4” barbed fittings are used in the installation and connections of all brands of 1/4” poly drip tubing and 1/4 drip line (.140 ID to .170 ID)...

Features For installing a dripper or spray jet on a 1/2 riser Available with 10/32 thread or a barb UV resistant Specifications Oper. pressure: ...

Features High-impact plastic UV-resistant Stake with flow adjustment available with 10/32 thread Flow rate on stake is adjustable to off For secur...

Spec Sheet  Install Manual DIG LEIT Solar Powered controller LEIT-1 ILV-075 with 3/4ʺ inline valve Ambient Light Powered Irrigation Controller Po...

DIG’s S-305DC is an encapsulated, watertight, two-way magnetic latching solenoid that requires minimal power to operate. The S-305DC is used with D...

DIG’s PC Drip Emitter Stakes with a barbed inlet are turbulent-flow-path pressure compensating drip emitters, designed to produce a consistent flow...

The Inline Drip Emitters offer installation simplicity using 1/4” distribution tubing. They are available in two flow rates of .5 GPH and 1 GPH at ...

DIG’s 360° flat-trajectory-stream micro sprayer is used in irrigation applications for above canopy watering and seed germination. The micro spraye...

DIG’s Micro Sprayers are available in 90°, 180° and 360° spray patterns with a flow rate of up to14.7 gallons per hour at 30 PSI. Producing a fine ...

DIG’s Micro Sprayers are available in 90°, 180° and 360° spray patterns with a flow rate of up to14.7 gallons per hour at 30 PSI. Producing a fine ...

DIG fixed pattern Wing Fan Micro Sprayers with male hex thread are available in 90°, 180° and 360° or as a complete assembly on PE flex riser with ...

DIG’s EXL Series Low-Flow 10-32 thread and 1/4? barbed Foggers operate at a pressure range of 30 to 80 PSI to produce micro-sized droplets, support...

DIG’s one-piece barbed fittings are constructed of corrosion-resistant, UV-protected poly acetal and can withstand the harsh environment, direct su...

The 1/4” barbed fittings are used in the installation and connections of all brands of 1/4” poly drip tubing and 1/4 drip line (.140 ID to .170 ID)...

The 1/4” barbed fittings are used in the installation and connections of all brands of 1/4” poly drip tubing and 1/4 drip line (.140 ID to .170 ID)...

Constructed of molded ultraviolet-resistant, high-impact plastic, DIG’s Compression Fittings are able to fit a range of polyethylene drip tubing an...

Features High-impact plastic UV-resistant Stake with flow adjustment available with 10/32 thread Flow rate on stake is adjustable to off For secur...

DIG’s 1/4 blank polyethylene distribution tubing is available in several colors and in lengths of up to 3000’. The distribution tubing is manufactu...

DIG premium polyethylene drip tubing is designed to meet all installation requirements for drip irrigation or low-volume irrigation systems for com...

DIG premium polyethylene drip tubing is designed to meet all installation requirements for drip irrigation or low-volume irrigation systems for com...

Contains antioxidants to protect the drip tubing from thermal degradation; minimum of 2% concentrated carbon black resin added Polyethylene drip tu...

Features Available in four configurations Large red color indicator for visibility Unique design insures reliable operation Can be installed with ...

DIG Pressure Compensating (PC) Button Drip Emitters are designed to produce a consistent flow rate over a pressure range of 7.25 to 58 PSI. DIG PC ...

Port Cap for unused emitter ports on the Maverick 12-Outlet Drip Manifold. A strip of 8 caps is considered a qty of 1.

DIG’s 360° adjustable drip emitters are available with a barb or spike and have a flow dial enabling the flow to be adjustable between 0 to 14.1 GP...

The Button Drip Emitters utilize a unique labyrinth flow path design, producing a turbulent flow for consistent operation with less chance of clogg...

DIG’s Micro Sprayers are available in 90°, 180° and 360° spray patterns with a flow rate of up to14.7 gallons per hour at 30 PSI. Producing a fine ...

The A-Jet adjustable micro sprayers incorporate an adjustable micro valve that allows control of flow and diameter to reduce or increase the wettin...

DIG’s EXL Series Low-Flow 10-32 thread and 1/4? barbed Foggers operate at a pressure range of 30 to 80 PSI to produce micro-sized droplets, support...

DIG’s one-piece barbed fittings are constructed of corrosion-resistant, UV-protected poly acetal and can withstand the harsh environment, direct su...

The 1/4” barbed fittings are used in the installation and connections of all brands of 1/4” poly drip tubing and 1/4 drip line (.140 ID to .170 ID)...

DIG’s line of threaded fittings consists of hose and pipe thread adapters and caps with male or female threads. Features Hose or pipe thread with ...

Constructed of molded ultraviolet-resistant, high-impact plastic, DIG’s Compression Fittings are able to fit a range of polyethylene drip tubing an...

DIG 1/4” Microline™ Dripline is a versatile and flexible, UV-protected small-diameter dripline that is suitable for a wide range of irrigation appl...

Spec Sheet  Install Manual DIG LEIT Solar Powered controller  ILV-200 with 2" Inline Valve Ambient Light Powered Irrigation Controller Powered so...

DIG Irrigation LEIT-1  Solar Powered Irrigation Controller ONLY Spec Sheet  Install Manual DIG’s LEIT 1™ single-station solar powered controller wi...

Spec Sheet  Install Manual DIG LEIT Solar Powered controller  LEIT1 ASV-075 with 3/4 Anti-Siphon Valve Ambient Light Powered Irrigation Controlle...