Rain Bird XFD0618500 0.6 GPH 18 Inch Spacing Dripline
Deliver water with precision using the Rain Bird XFD0618500 XF Dripline, the most flexible, kink-resistant dripline tubing on the market. This 500 ft. coil is engineered for reliability, featuring built-in, pressure-compensating emitters spaced every 18 inches. Each emitter provides a consistent 0.6 GPH (gallons per hour) flow rate, ensuring all your plants get the same amount of water, regardless of changes in pressure or elevation.
The XFD0618500 XF Dripline's unique material allows for significantly tighter turns (down to a 3" radius) with fewer elbows, making installation around curves and in tight planting areas faster and easier than ever. The dual-layered tubing (brown over black) provides unmatched resistance to chemicals, UV damage, and algae growth, guaranteeing long-term durability for on-surface applications.
This dripline is the perfect solution for irrigating ground cover, dense plantings, garden beds, and hedges. Its pressure-compensating design provides a consistent flow across the entire lateral length (from 8.5 to 60 psi), giving you a healthier landscape while conserving water.
Features:
- XF Dripline - 0.6 GPH, 18 in. Spacing, 500 ft. Coil
- Unique material offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation
- Choice of flow rates, spacing and coil lengths provides design flexibility for a variety of non-turfgrass applications
- Accepts Rain Bird Easy Fit Compression Fittings, XF Dripline Insert Fittings and 17mm insert fittings
- Use an Air/Vacuum Relief Valve Kit when installation is below soil
- The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi
- Dual-layered tubing (brown over black) provides unmatched resistance to chemicals, algae growth and UV damage
Specifications:
- Outside diameter: 0.634" (16.1 mm)
- Inside diameter: 0.536" (13.6 mm)
- Wall thickness: 0.049" (1.2 mm)
Operating Range:
- Pressure: 8.5 to 60 psi (0.58 to 4.14 bar)
- Temperature: Up to 100° F (43.3 C) water; up to 125 F (51.7° C) ambient
- Required filtration: 120 mesh
More Information
Model XFD0618500
Application On Surface
Features Extra Flexible
Emitter Spacing 18 in
Tubing Diameter 1/2 in
Flow Rate 0.6 gph
Specifications
Outside diameter: 0.634" (16.1 mm)
Inside diameter: 0.536" (13.6 mm)
Wall thickness: 0.049" (1.2 mm)
Use with XF Dripline Insert Fittings, Easy Fit Compression Fittings, and 17mm Insert Fittings.
The flexible polyethylene tubing shall have factory installed pressure-compensating, inline emitters installed every 12-24 inches. The flow rate from each installed inline emitter shall be 0.6 or 0.9 gallons per hour when inlet pressure is between 8.5 and 60 psi.
The inline emitter diaphragm shall have a pressure-regulating diaphragm with a spring action allowing it to self-rinse if there is a plug at the outlet hole. The bend radius shall be 3 inches whether bending the tubing with the natural bend of the coil or against it.
The inline emitter inlet shall be raised off the inside tube wall to minimize dirt intrusion. The XF™ Series Dripline inline tubing shall be manufactured by Rain Bird Corporation, Azusa, California.
Operating Range
Pressure: 8.5 to 60 psi (0.58 to 4.14 bar)
Temperature: Up to 100° F (43.3 C) water; up to 125 F (51.7° C) ambient
Required filtration: 120 mesh
