Brilliance Olympic Bollard Light

The Olympic Bollard Light comes complete with an ABS mounting stake, a Lighting Shrink professional crimp, a heat shrink cable connector and Chameleon MR16 Lamp. This path light is a perfect way to add color to your pathways and walkways.

USE: Path, area, and garden accent lighting

LAMP: Chameleon MR16

FINISH: Brass, machined copper or blackened brass

Fixture Finish Maintenance

The Olympic fixture is available in the following finishes: machined copper, brass, or blackened brass. These metals offer a beautiful living finish that weathers over time to a unique patina. If you prefer to maintain the original finish, we recommend wiping down the fixture periodically with a light oil, such as WD-40. 

INSTALLING THE LAMP 1. Unthread acrylic top assembly 2. Install the MR-16 lamp using the supplied snap ring (no tools required) 3. Install socket onto lamp 4. Screw the acrylic top assembly into fixture INSTALLING THE GROUND STAKE 1. Dig a hole in the ground approximately 4” wide by 10” deep. A rubber mallet may be used to drive the stake into the ground when working with soft soil. 2. Lay the power cable from the fixture into the slotted relief on the stake. 3. Screw the fixture into the stake. 4. Use a level to assure the top of the stake is level with the ground, or put a level on the stem of the fixture

Wattage: 6W
Lumens: 328-441
Kelvins: 2200-5700
Beam Spread: 38 degrees
Color: RGBW
Input Voltage: 11-18 VAC/DC/60Hz
Replaces: 35W Halogen
CRI: 80
IP: 61
Lamp Life (hours): 50,000
Warranty (years): 5